

Remigochi pcb
For 18-500 capstone
- Size
- 63.5 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 86
- Pads
- 280
- Tracks, vias
- 406, 117
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 12 Feb 2026
- Updated
- 18 May 2026
Overview
Remigochi pcb is an open-source printed circuit board by thetaspirit, from the thetaspirit/remigochi-pcb repository on GitHub. It is a 2-layer board of 63.5 × 76.2 mm with 67 parts on 86 nets, routed with 406 tracks and 117 vias.
It is built around the ESP32-S3-WROOM-1-N8, AP2112K-3.3 and ESD122DMXR, with the MAX-M10S and 1N4148W among its other parts. Its parts include 19 resistors, 9 diodes, 7 connectors, 6 switches and 5 capacitors. It belongs with the ESP32 boards of this library.
Main components
5ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedESD122DMXR
X2-SON-3(0.6x1)-40℃~+125℃ 0.2pF 10nA 2 2.5A@8/20us 20W@8/20us 3.6V 7.9V 8.4V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 X2-SON-3(0.6x1) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)MAX-M10S
LCC-18_10.1X9.7LCC-18_10.1X9.7 New Arrivals ROHSu-bloxUncategorised1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SW_Push | push-button:Korean Hroparts Elec K2-1157SP-I4SW-01 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP7, TP8, TP9 |
| 4 | 33 | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R15 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C8 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R6, R7 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R10 |
| 3 | GREEN | Diode_SMD:D_1206_3216Metric | D2, D7, D9 |
| 3 | PMOS | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP6, JP8 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R14 |
| 2 | 15 | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | 68 | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | RED | Diode_SMD:D_1206_3216Metric | D1, D8 |
| 2 | YELLOW | Diode_SMD:D_1206_3216Metric | D3, D6 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D5 |
| 1 | 270k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 40V_TVS | Diode_SMD:D_0402_1005Metric | D4 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | Buzzer | buzzer:Huaneng MLT-7525 | BZ1 |
| 1 | Conn_01x02_Pin | Connector_Wire:SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm_Relief | J3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J9 |
| 1 | Conn_Coaxial_Small | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J5 |
| 1 | ESD122DMXR | esd:IC_ESD122DMXR | U2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | MAX-M10S | RF_GPS:ublox_MAX | U4 |
| 1 | MCP73833-xxx-UN | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | Micro_SD_Card | microSD-Card:TF-01A | J4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
Similar boards
- 6 layers64.8 × 69.9 mm

- 4 layers31.8 × 15.3 mm

Tracker PCB
NicholasKorth/Slim-Sleep-Tracker
A low-profile wrist wearable that measures motion, optical heart rate and SpO2 and streams them over Bluetooth LE to a PC visualizer.
64 parts - 6 layers63.7 × 24 mm

Pocketssd-21
tracelabs-pcb/pocketssd-21
Compact USB 3.2 Gen2 to NVMe M.2 bridge PCB — JMS583, 6-layer
85 parts - 2 layers91.5 × 100 mm

Trailmap
katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)
57 parts2 - 4 layers45.8 × 46.4 mm

Totem
ljagiello/totem-compass
Independent reverse-engineering documentation of the Totem Compass ESP32 + MicroPython firmware (v5.0.2): image/memory map, the 96 frozen modules, the 2.4 GHz protocols (BLE, ESP-NOW mesh, WiFi OTA), and a custom-client…
144 partsApache-2.0 - 4 layers70.9 × 75 mm

Flagshep Audio Player V1
HYLDAIC/Flagshep-V1_Audio-Player
A high fidelity semi-portable audio player student project with provided PCB files, 3D files and Code
77 parts1CERN-OHL-P-2.0 - 2 layers100.6 × 131 mm

Habitat V5
machadoleonardo94/HabitatControl-hardware
Hardware files for HabitatControl, designed on DipTrace
161 parts1 - 2 layers160 × 160 mm

Questions
How big is the Remigochi pcb PCB?
It measures 63.5 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Remigochi pcb use?
67 parts, built around the ESP32-S3-WROOM-1-N8, AP2112K-3.3, ESD122DMXR and MAX-M10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remigochi pcb KiCad files?
From the thetaspirit/remigochi-pcb repository on GitHub, at the commit this page was made from: the board is remigochi-pcb.kicad_pcb and its schematic remigochi-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remigochi pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask thetaspirit before reusing the design.