2 layers73 × 74 mm
Valve Wizard Cab Sim 3
therealdjryan/Valve-Wizard-Cab-Sim
http://valvewizard.co.uk/cabsim.html
50 parts
2 layers89.8 × 70.8 mm
Valve Wizard Cab Sim
therealdjryan/Valve-Wizard-Cab-Simhttp://valvewizard.co.uk/cabsim.html
- Size
- 89.8 × 70.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 30
- Pads
- 148
- Tracks, vias
- 247, 266
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Jan 2022
- Updated
- 1 Feb 2022
Overview
Valve Wizard Cab Sim is an open-source printed circuit board by therealdjryan, from the therealdjryan/Valve-Wizard-Cab-Sim repository on GitHub. It is a 2-layer board of 89.8 × 70.8 mm with 53 parts on 30 nets, routed with 247 tracks and 266 vias.
It is built around the TL072, BC846BPN and MMBF170. Its parts include 18 resistors, 14 capacitors, 8 connectors, 5 diodes and 2 transistors. It belongs with the audio and music boards of this library.
Main components
3README
README.mdParts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R10, R17 |
| 3 | 1n4148 | Diode_SMD:D_SOD-123 | D2, D4, D5 |
| 2 | 100K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3 |
| 2 | 10R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R16 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R11 |
| 2 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R6 |
| 2 | 22n | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C5, C6 |
| 2 | 470u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C11 |
| 2 | 47u | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C2, C10 |
| 1 | 100KA | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV2 |
| 1 | 100KB | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 180K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 1n | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C4 |
| 1 | 1n4001 | Diode_SMD:D_SMA | D1 |
| 1 | 1u | Capacitor_THT:C_Rect_L7.2mm_W8.5mm_P5.00mm_FKP2_FKP2_MKS2_MKP2 | C12 |
| 1 | 220R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 220p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 22K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 2n2 | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C3 |
| 1 | 330R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | 330n | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C9 |
| 1 | 33K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14 |
| 1 | 470n | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C7 |
| 1 | 47K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | 4K7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18 |
| 1 | BC846BPN | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q2 |
| 1 | Battery | Wire_Connector_Supported:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | FS | Wire_Connector_Supported:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | FS_EF | Wire_Connector_Supported:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | GND | Wire_Connector_Supported:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | IN | Wire_Connector_Supported:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | IN | MyLibraries:Jack_6.35mm_Neutrik_NMJ6HC-S_SOLDER_LUG | J10 |
| 1 | LED | LED_THT:LED_D3.0mm_FlatTop | D3 |
| 1 | MMBF170 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | OUT | MyLibraries:Jack_6.35mm_Neutrik_NMJ6HC-S_SOLDER_LUG | J11 |
| 1 | Power | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | TL072 | MyLibraries:SOIC_DIP-8 | U1 |
The 50 most common of 53 parts.
More from therealdjryan/Valve-Wizard-Cab-Sim
1Similar boards
- 4 layers50.8 × 22.9 mm
Open Telemetry digitalSensorShield
jonasbjurel/open_telemetry_HW
The OFT001v1 card has an L80-M39 GPS with a built-in patch antenna, and an optional connector for an external 50 Ohm active antenna; an MP-9250 3D axis for each of: Accelerometer, Gyroscope and Magnetometer; and a…
44 parts1 - 2 layers14 × 14 mm
Try2
SKGleba/psp2sdboot
Tools and guides for achieving code execution in Playstation Vita/TV BootROM's "SD boot mode"
10 parts51MIT - 2 layers72 × 22 mm
Cheating calc
ChinesePrince07/TI-84-GPT-HACK
A mod that gives your TI-84 Wi-Fi, ChatGPT, and the ability to disappoint your math teacher in ways never thought possible. Original idea by Chromalock, reconstructed by myself after his repo is taken down.
8 parts9GPL-3.0 - 6 layers44 × 118 mm
3210retro test
DasBasti/NokiaRetroFit
Retrofitting a Nokia 3210 with modern Processor
195 parts9Apache-2.0 - 2 layers114 × 89 mm
- 6 layers105 × 70 mm
- 4 layers143 × 55 mm
- 2 layers100 × 90 mm
Questions
How big is the Valve Wizard Cab Sim PCB?
It measures 89.8 × 70.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Valve Wizard Cab Sim use?
53 parts, built around the TL072, BC846BPN and MMBF170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Valve Wizard Cab Sim KiCad files?
From the therealdjryan/Valve-Wizard-Cab-Sim repository on GitHub, at the commit this page was made from: the board is Valve Wizard Cab Sim.kicad_pcb and its schematic Valve Wizard Cab Sim.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Valve Wizard Cab Sim design in my own project?
Its repository states no licence, so its author keeps all rights: ask therealdjryan before reusing the design.