
Volumer
ThePurpleOne/volumer
Hardware module to easily control Individual Windows app volumes, just like the volume Mixer.

Hardware module to easily control Individual Windows app volumes, just like the volume Mixer.
Volumer v02 is an open-source printed circuit board by ThePurpleOne, from the ThePurpleOne/volumer repository on GitHub, published under the MIT licence. It is a 4-layer board of 90 × 80 mm with 39 parts on 59 nets, routed with 307 tracks and 55 vias.
It is built around the RP2040, W25Q128JVSIQ and LD1117S33TR(MS), with the WS2812B and TS-3025-B-C-B among its other parts. Its parts include 15 capacitors, 8 resistors, 4 diodes, 3 ICs and 2 switches. It belongs with the RP2040 boards of this library.
Hardware module to easily control Individual Windows app just like the volume Mixer.
Accessing this window is a pain, especially if you're in game and you need to quickly lower that annoying SCREAMING discord friend in order to hear some terrorist footsteps.
The PCB parts have been chosen for cheapest PCB Assembly with only 2 JLC PCB extended parts
First you have to order your PCB and mount the potentiometers:
Then you can install the software on the PC and flash the firmware on the Board:
There is no case for now, don't hesitate to contribute ! Here is the dimensions
https://github.com/omriharel/deej
For simplicity and not to reinvent the wheel, I'm using an opensource project called DEEJ, which actually does exactly what I want to do.
You only need to put the executable in the same folder as the config file and make a shortcut to the executable in the startup folder to have it start with windows.
config : ./src/pc/config.yaml
In the config, You can set which potentiometer controls which application and set the COM port of the board (The COM port is not automatically detected).
You Circuit python or a UF2 compiled C program are available in the release page.
There is an already compiled UF2 file in the releases.
You can also compile the code yourself (need the RPI PICO SDK) and flash it to the board (Drag'n'drop in BOOTSEL mode).
Compile with:
cd src/board/c
mkdir build
cd build
cmake ..
makeYou can then flash the board with the generated UF2 file in the bin folder.
You can also use Circuitpython, which for a firmware that simple, i would not recommend it since it's just less reliable and efficient.
You'll first need to install Circuitpython firmware in the board and then push the program into it (Firmware and program available in release).
To install the circuitpython firmware, you can simply drag and drop the UF2 file on the board after a boot with the BOOTSEL button pressed.
When Circuitpython is running, you can drag and drop the code.py file into the board Circuitpython mass storage (Not the one when bootsel is pressed).
Since there are submodules, you need to clone with the --recurse-submodules flag:
git clone --recurse-submodulesIf you cloned without submodules
git submodule update --init| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C7, C10, C11, C12, C13, C14, C15 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4 |
| 4 | slide_pot | slide_pot:PTA45432015CPB503 | VR1, VR2, VR3, VR4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R5 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R6 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 30p | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 33 | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | TS-3025-B-C-B | push_button:TS-1187A-B-A-B | SW1, SW2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 12Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | LD1117S33TR | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LOGO | libs:qr | G*** |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | ~ | USBC:USBC_16P | USB1 |

ThePurpleOne/volumer
Hardware module to easily control Individual Windows app volumes, just like the volume Mixer.

ThePurpleOne/volumer
Hardware module to easily control Individual Windows app volumes, just like the volume Mixer.

Bouni/BSH-Board
A board that interfaces the DBUS of several home appliances and brings them into Home-Assitant via ESPHome


Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

ph-design/PH60-SC
A printable low-profile 60% wireless mechanical keyboard kit powered by ZMK firmware.

ianklug/bemini
A miniature mechanical keyboard controller with a rotary encoder for staggered-key rhythm games.

khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries

OpenTaxus/opentaxus
Opentaxus is a permissively licensed set of hardware, software, and tooling to help as a starting point for customized conference badges.

skogaby/skogaslider
Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience
It measures 90 × 80 mm and has 4 copper layers, 1.6 mm thick.
39 parts, built around the RP2040, W25Q128JVSIQ, LD1117S33TR(MS) and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ThePurpleOne/volumer repository on GitHub, at the commit this page was made from: the board is pcb/volumer_v0.2/volumer_v02.kicad_pcb and its schematic pcb/volumer_v0.1/rp2040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).