2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k
2 layers
Esp8266-programmer
theopensourcerer/esp8266-programmerWIP - ESP Device Programmer without solder
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 23
- Pads
- 116
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 26 Mar 2017
- Updated
- 26 Apr 2017
Overview
Esp8266-programmer is an open-source printed circuit board by theopensourcerer, from the theopensourcerer/esp8266-programmer repository on GitHub. It is a 2-layer board with 19 parts on 23 nets.
It is built around the MCP2221-I/SL and MCP1700T-3302E/TT(MS). Its parts include 5 resistors, 4 capacitors, 3 ICs, 3 connectors and 3 switches. It belongs with the interfaces and adapters boards and the ESP8266 boards of this library.
Main components
2
MCP2221-I/SL
SOIC-14-40℃~+85℃ 13mA 3V~5.5V 46uA USB 2.0 USB to UART、USB to I2C SOIC-14 USB Converters ROHSMicrochip TechnologyUSB Converters
MCP1700T-3302E/TT(MS)
SOT-23-40℃~+85℃@(Ta) 1 120uVrms 180mV@(300mA) 2uA 3.3V 300mA 5.5V 80dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdesp8266-programmer
WIP - ESP Device Programmer without solder
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | KiCad/Resistors_SMD.pretty:R_1206_HandSoldering | R1, R2, R3, R4, R5 |
| 1 | 1uF | KiCad/Capacitors_ThroughHole.pretty:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 330nF | KiCad/Capacitors_SMD.pretty:C_1206_HandSoldering | C4 |
| 1 | 330uf | KiCad/Capacitors_ThroughHole.pretty:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 4.7uF | KiCad/Capacitors_ThroughHole.pretty:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | CONN_01X04 | madworm/SIL-Headers.pretty:SIL-5 | P2 |
| 1 | CONN_02X05 | madworm/DIL-Headers.pretty:DIL-5 | P3 |
| 1 | ESP-12 | bgowland/esp12-pogo_pins:ESP-12-with-pogo-pin-pads | U99 |
| 1 | FLASH | KiCad/Buttons_Switches_ThroughHole.pretty:SW_PUSH_6mm_h4.3mm | SW2 |
| 1 | Jumper_NO_Dual | madworm/SIL-Headers.pretty:SIL-3 | JP1 |
| 1 | MCP1700T-3302E/TT | KiCad/TO_SOT_Packages_SMD.pretty:SOT-23 | U1 |
| 1 | MCP2221-I/SL | KiCad/Housings_SOIC.pretty:SOIC-14_3.9x8.7mm_Pitch1.27mm | U2 |
| 1 | RESET | KiCad/Buttons_Switches_ThroughHole.pretty:SW_PUSH_6mm_h4.3mm | SW1 |
| 1 | SW_DP3T | KiCad/Buttons_Switches_ThroughHole.pretty:SW_DIP_x3_W7.62mm_Slide_LowProfile | SW3 |
| 1 | USB_OTG | greatscottgadgets/gsg-kicad-lib/gsg-modules.pretty:USB-MICROB-FCI-10103592 | P1 |
Questions
What parts does the Esp8266-programmer use?
19 parts, built around the MCP2221-I/SL and MCP1700T-3302E/TT(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp8266-programmer KiCad files?
From the theopensourcerer/esp8266-programmer repository on GitHub, at the commit this page was made from: the board is pcb/esp8266-programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp8266-programmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask theopensourcerer before reusing the design.
Similar boards
- 2 layers17.8 × 34 mm
LinUSBConverter
uCAN-LIN/LinUSBConverter
Open source USB ↔ LIN bus dongle. LIN 2.1 master / slave / monitor, optically isolated, SLCAN compatible — no proprietary drivers.
29 parts93GPL-3.0 - 2 layers89.8 × 10.2 mm
- 2 layers79.2 × 59.2 mm
- 2 layers85 × 54 mm
Gps mezzanine
96boards/mezzanine-community
Repository for community designed mezzanine boards for the 96boards specification.
182 parts32 - 4 layers320 × 320 mm
- 2 layers110 × 80 mm
TeensyShield progLED
samuelclay/grove
Grove is the forest inside your lungs. An interactive biofeedback art installation at Burning Man 2016
85 parts16 - 2 layers31.2 × 17.1 mm
Knox Key Kicad
Kingdragoncat/Knox-Key
Knox Key is a high-performance, open-source hardware authenticator designed for secure digital identity and cryptographic operations.
29 parts5