
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

an electronic wind instrument / clarinet / flute / not sure
Midiperformer is an open-source printed circuit board by thenfour, from the thenfour/Clarinoid repository on GitHub. It is a 2-layer board of 45 × 42 mm with 34 parts on 54 nets, routed with 228 tracks and 10 vias.
It is built around the L7805 and WS2812. Its parts include 16 resistors, 6 connectors, 5 ICs, 2 capacitors and 2 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 330 | Resistor_SMD:R_0402_1005Metric | R9, R10, R11, R12, R13, R14, R15, R16 |
| 4 | 47 | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | 220 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 470 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 6N138 | Package_DIP:DIP-8_W7.62mm | U1, U2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 1 | Barrel_Jack | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_02x08_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J6 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | MIDI IN A | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | MIDI IN B | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | MIDI OUT A | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | MIDI OUT B | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | SW_Push | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | SW1 |
| 1 | Teensy-LC | clarinoid2:Teensy_LC | U4 |
| 1 | WS2812 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | U5 |

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure


thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.

ryomuk/TangNanoDCJ11MEM
Memory system and UART implemented on Tang Nano 20K for DEC DCJ11 PDP-11 Processor


cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.

Duckle29/Vitamins-included
This repo holds a variation of the lets split. This board requires no soldering



It measures 45 × 42 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the L7805 and WS2812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thenfour/Clarinoid repository on GitHub, at the commit this page was made from: the board is CAD/MIDIperformer/midiperformer00-rev2/midiperformer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thenfour before reusing the design.