
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

an electronic wind instrument / clarinet / flute / not sure
Clarinoid3 is an open-source printed circuit board by thenfour, from the thenfour/Clarinoid repository on GitHub. It is a 2-layer board of 690.7 × 278.5 mm with 158 parts on 146 nets, routed with 1,194 tracks and 89 vias.
It is built around the CY8CMBR3108-LQXIT, ABPMAND001PG2A3 and PCM5102APW, with the TLV75533PDBV, TLV75733PDBV and WS2812 among its other parts. Its parts include 48 resistors, 32 capacitors, 17 diodes, 16 ICs and 15 switches. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R4, R4, R10, R13, R13, R13, R14, R14, R14, R17, R17, R17, R18, R18, R18 +4 |
| 14 | 470R | Resistor_SMD:R_0402_1005Metric | R5, R6, R34, R34, R35, R35, R36, R36, R37, R37, R38, R38, R39, R39 |
| 13 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C6, C13, C14, C23, C24, C24, C24, C25, C25, C25, C27, C30 |
| 12 | LED | LED_SMD:LED_0603_1608Metric | D5, D5, D7, D7, D8, D8, D9, D9, D10, D10, D11, D11 |
| 10 | SW_Push | clarinoid2:XKB switch jlcpcb SW_TS-1187A-B-A-B | SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW6 |
| 7 | 10uF | Capacitor_SMD:C_0402_1005Metric | C3, C5, C10, C11, C15, C16, C26 |
| 6 | 22uF | Capacitor_SMD:C_0603_1608Metric | C17, C18, C19, C20, C21, C22 |
| 4 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C7, C8, C9, C12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H2, H3, H4, H5 |
| 4 | SW_Push | SamacSys_Parts:B3F-4055 | SW2, SW3, SW4, SW5 |
| 3 | 22R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 3 | 75k | Resistor_SMD:R_0402_1005Metric | R12, R12, R12 |
| 3 | MPR121, 0x5A | Package_DFN_QFN:UQFN-20_3x3mm_P0.4mm | U4, U4, U4 |
| 3 | PCA9554APW,118 | SamacSys_Parts:SOP65P640X110-16N | IC1, IC1, IC1 |
| 2 | 47R | Resistor_SMD:R_0805_2012Metric | R20, R21 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 1 | clipboard:9196e359-7150-4967-9b24-df29c59429f9 | ||
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C29 |
| 1 | 0.22uF | Capacitor_SMD:C_0603_1608Metric | C28 |
| 1 | 0.5R | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 100% | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | 1N4148 | Diode_SMD:D_SOD-323 | D6 |
| 1 | 1uH | clarinoid2:Inductor_MCS0630-1R0MN2 | L1 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 25% | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | 2R | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 50% | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | 6N138 | Package_DIP:DIP-8_W7.62mm | U8 |
| 1 | 75% | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | ABPMAND001PG2A3 | SamacSys_Parts:ABPMAND001PG2A3 | U** |
| 1 | APCI0136-P001A Teensy_4.0_MicroMod | clarinoid2:Teensy_4.0_MicroMod_nospacer | U3 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | CY8CMBR3108-LQXIT | SamacSys_Parts:QFN50P300X300X60-17N-D | IC4 |
| 1 | Injoinic IP5306 battery charge | SamacSys_Parts:SOIC127P599X155-9N | IC2 |
| 1 | M.2 riser SMTSO2530CTJ | clarinoid2:Wurth_9774025151_M2.5_spacer_for_micromod | H1 |
| 1 | MIDI IN | clarinoid2:SWITCHCRAFT_35RAPC4BV4 | J10 |
| 1 | MIDI OUT | clarinoid2:SWITCHCRAFT_35RAPC4BV4 | J11 |
| 1 | Molex microSD 503398-1892 | clarinoid2:MOLEX_503398-1892 | J3 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | PTR902-2020K-A103 | SamacSys_Parts:PTR902-2020K-A103 | R** |
| 1 | Pressure1_0x28_I2C0 | SamacSys_Parts:ABPMAND001PG2A3 | U10 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW11 |
| 1 | SSD1306 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J12 |
| 1 | Switchcraft 35RAPC4BV4 | clarinoid2:SWITCHCRAFT_35RAPC4BV4 | J1 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | TLV75733PDBV | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | WS2812 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | U9 |
| 1 | XKB_U262-16XN-4BVC11 USB-C recept | clarinoid2:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | header_i2c | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | ssd1306_graphic | clarinoid2:SSD1306_128x64_approximate | U12 |
| 1 | touch_conn_capsense | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J14 |
The 147 most common of 158 parts.

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

pez-globo/pufferfish-electronics
Circuit schematics and PCB layouts for the Pufferfish ventilator.

rohamid/chroma-pixel-zeta
The minimal configuration of Chroma Pixel board for GUI application

Dschadu/Geistwerk-BigCore
An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.




azmat-bilal/bldc_motor_controller_pcb
A Brushless DC Motor controller board. The design is inspired and is compatible with Odrive project (https://github.com/madcowswe/ODriveHardware) except that this one has a single channel.
It measures 690.7 × 278.5 mm and has 2 copper layers, 1.6 mm thick.
158 parts, built around the CY8CMBR3108-LQXIT, ABPMAND001PG2A3, PCM5102APW and TLV75533PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thenfour/Clarinoid repository on GitHub, at the commit this page was made from: the board is CAD/arch/clarinoid3-devboardfork/00/clarinoid3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thenfour before reusing the design.