
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

an electronic wind instrument / clarinet / flute / not sure
Clarinoid devboard is an open-source printed circuit board by thenfour, from the thenfour/Clarinoid repository on GitHub. It is a 2-layer board of 131.5 × 95 mm with 121 parts on 158 nets, routed with 1,309 tracks and 208 vias.
It is built around the CY8CMBR3108-LQXIT, PCM5102APW and TLV75533PDBV, with the TLV75733PDBV, WS2812 and WS2812B among its other parts. Its parts include 28 capacitors, 26 resistors, 15 diodes, 14 ICs and 12 connectors. It belongs with the microcontroller boards boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C6, C13, C14, C23, C24, C25, C27, C30 |
| 8 | 470R | Resistor_SMD:R_0402_1005Metric | R5, R6, R34, R35, R36, R37, R38, R39 |
| 7 | 10uF | Capacitor_SMD:C_0402_1005Metric | C3, C5, C10, C11, C15, C16, C26 |
| 7 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP8 |
| 6 | 22uF | Capacitor_SMD:C_0603_1608Metric | C17, C18, C19, C20, C21, C22 |
| 4 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C7, C8, C9, C12 |
| 4 | 4.7k | Resistor_SMD:R_0402_1005Metric | R13, R14, R40, R41 |
| 4 | MountingHole | clarinoid2:Wurth Elektronik Reverse SMD Spacer M3 | H2, H3, H4, H5 |
| 4 | SW_Push | SamacSys_Parts:B3F-4055 | SW2, SW3, SW4, SW5 |
| 4 | WS2812B | clarinoid2:LED_WS2812B-B Worldsemi | D12, D13, D14, D15 |
| 3 | 22R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R10 |
| 2 | 47R | Resistor_SMD:R_0805_2012Metric | R20, R21 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | SW_Push | clarinoid2:XKB switch jlcpcb SW_TS-1187A-B-A-B | SW1, SW6 |
| 2 | blue | LED_SMD:LED_0603_1608Metric | D5, D7 |
| 2 | green | LED_SMD:LED_0603_1608Metric | D8, D9 |
| 2 | red | LED_SMD:LED_0603_1608Metric | D10, D11 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C29 |
| 1 | 0.22uF | Capacitor_SMD:C_0603_1608Metric | C28 |
| 1 | 0.5R | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 100% | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D6 |
| 1 | 1uH | clarinoid2:Inductor_MCS0630-1R0MN2 | L1 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 25% | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | 2R | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 50% | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | 6N138 | Package_DIP:DIP-8_W7.62mm | U8 |
| 1 | 75% | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | 75k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | APCI0108-P001A Teensy_4.0_MicroMod | SamacSys_Parts:21992304 | U3 |
| 1 | AudioOut | clarinoid2:SWITCHCRAFT_35RAPC4BV4_OvalHoles | J1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | CY8CMBR3108-LQXIT | SamacSys_Parts:QFN50P300X300X60-17N-D | IC4 |
| 1 | CapTouchSlider3 | CapTouchSliders:CaptouchSlider_Masked_H3x3_A1.0mm_x12 | J20 |
| 1 | DIP_x4 blue dac enable | clarinoid2:dip switch XKB DS-04RP | SW8 |
| 1 | DIP_x4 red power source | clarinoid2:dip switch XKB DS-04RP | SW9 |
| 1 | Injoinic IP5306 battery charge | SamacSys_Parts:SOIC127P599X155-9N | IC2 |
| 1 | LOGO | LOGO | G*** |
| 1 | M.2 riser 2.5mm | clarinoid2:Sinhoo SMTSO2530CTJ | H1 |
| 1 | MIDI IN | clarinoid2:SWITCHCRAFT_35RAPC4BV4_OvalHoles | J10 |
| 1 | MIDI OUT | clarinoid2:SWITCHCRAFT_35RAPC4BV4_OvalHoles | J11 |
| 1 | MPR121, 0x5A | Package_DFN_QFN:UQFN-20_3x3mm_P0.4mm | U4 |
| 1 | Micromod outline | clarinoid2:Teensy_4.0_MicroMod outline fab | U2 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PCA9554APW,118 | SamacSys_Parts:SOP65P640X110-16N | IC1 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Pressure1_0x28_I2C0 | SamacSys_Parts:ABPMAND001PG2A3 | U10 |
| 1 | RotaryEncoder_Switch_ABC12 | clarinoid2:Bourns_ENC_PEC11R-4215F-S0024 | SW7 |
| 1 | SSD1306 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J12 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | TLV75733PDBV | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | TestPoint | clarinoid2:Pad_Plain | TP7 |
| 1 | WS2812 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | U9 |
| 1 | XKB_U262-16XN-4BVC11 USB-C recept | clarinoid2:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | decor padarray | clarinoid2:DecorativeGroundPad | U5 |
| 1 | header_i2c | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | header_i2c1 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | header_power tap | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | header_spi | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | microSD SOFNG TF-15x15 | clarinoid2:SOFNG TF-15x15 (LCSC C111196) | J3 |
| 1 | ssd1306_graphic | clarinoid2:SSD1306_128x64_approximate | U12 |
| 1 | touch_conn_capsense | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J14 |

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure


thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

Dschadu/Geistwerk-BigCore
An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.

rohamid/chroma-pixel-zeta
The minimal configuration of Chroma Pixel board for GUI application




sequoia-hope/bluebuzz
A Bluetooth vibrator controller: RP2350A + Raspberry Pi Radio Module 2 (the first board, an nRF52840 module, is abandoned and kept in archive/nrf52840/): Wi-Fi 4 and Bluetooth 5.2 Classic + LE (CYW43439), so the toy can…

It measures 131.5 × 95 mm and has 2 copper layers, 1.6 mm thick.
121 parts, built around the CY8CMBR3108-LQXIT, PCM5102APW, TLV75533PDBV and TLV75733PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thenfour/Clarinoid repository on GitHub, at the commit this page was made from: the board is CAD/clarinoid-devboard/clarinoid-devboard-04/clarinoid-devboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thenfour before reusing the design.