
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

an electronic wind instrument / clarinet / flute / not sure
Clarinoid devboard is an open-source printed circuit board by thenfour, from the thenfour/Clarinoid repository on GitHub. It is a 2-layer board of 90 × 126 mm with 102 parts on 56 nets, routed with 271 tracks and 81 vias.
Its parts include 36 capacitors, 16 diodes, 14 ICs, 12 resistors and 8 connectors. It belongs with the microcontroller boards boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C8, C9, C10, C11, C12, C13, C18, C19 |
| 8 | 22uF | Capacitor_SMD:C_1206_3216Metric | C21, C22, C23, C24, C30, C31, C32, C33 |
| 6 | mb1 | clarinoid2:mouse-bite-2mm-slot | U49, U53, U55, U62, U65, U68 |
| 4 | 100% | LED_SMD:LED_0805_2012Metric | D4, D8, D12, D16 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C17, C20, C28, C29 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C15, C16 |
| 4 | 22uF | Capacitor_SMD:C_0603_1608Metric | C25, C26, C34, C35 |
| 4 | 25% | LED_SMD:LED_0805_2012Metric | D1, D5, D9, D13 |
| 4 | 4p MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J4, J6, J34 |
| 4 | 50% | LED_SMD:LED_0805_2012Metric | D2, D6, D10, D14 |
| 4 | 75% | LED_SMD:LED_0805_2012Metric | D3, D7, D11, D15 |
| 4 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1, BT2, BT3, BT4 |
| 4 | Injoinic IP5306 battery charge | clarinoid2:SOIC127P599X155-9N (IP5306) | IC1, IC2, IC3, IC4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H6 |
| 4 | SW_Push | clarinoid2:XKB switch jlcpcb SW_TS-1187A-B-A-B | SW1, SW2, SW3, SW4 |
| 4 | header_power tap MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3, J5, J7 |
| 4 | power template | clarinoid2:dev board power board template | U1, U2, U3, U39 |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C27, C36 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C5, C14 |
| 2 | 0.5R | Resistor_SMD:R_0603_1608Metric | R6, R12 |
| 2 | 0.5R | Resistor_SMD:R_1206_3216Metric | R3, R11 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R8 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R2, R10 |
| 2 | 1uH-Sunlord | clarinoid2:Inductor_MCS0630-1R0MN2 | L1, L3 |
| 2 | 1uH-psa | clarinoid2:Inductor_MCS0630-1R0MN2 | L2, L4 |
| 2 | 2R | Resistor_SMD:R_1206_3216Metric | R1, R9 |
| 2 | 2R | Resistor_SMD:R_0603_1608Metric | R4, R7 |

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure


thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels


It measures 90 × 126 mm and has 2 copper layers, 1.6 mm thick.
102 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thenfour/Clarinoid repository on GitHub, at the commit this page was made from: the board is CAD/clarinoid-devboard/clarinoid-devboard-07-batt/clarinoid-devboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thenfour before reusing the design.