

Xmas tree with sdressable LEDs, and ESP32 controller
- Size
- 150 × 120 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 45
- Pads
- 109
- Tracks, vias
- 170, 40
- Pours
- 24
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Nov 2024
- Updated
- 6 Dec 2024
Overview
Tree is an open-source printed circuit board by theloukou, from the theloukou/xmasSmartTree repository on GitHub. It is a 2-layer board of 150 × 120 mm with 25 parts on 45 nets, routed with 170 tracks and 40 vias.
It is built around the ESP32-WROOM-32, WS2812B and BSS138. Its parts include 9 capacitors, 7 diodes, 4 resistors, 2 switches and 1 IC. It belongs with the ESP32 boards of this library.
Main components
3ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C11 |
| 7 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 1 | BOOT | Switches:TACTILE_SWITCH_PTH_6.0MM | S2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | RST | Switches:TACTILE_SWITCH_PTH_6.0MM | S1 |
More from theloukou/xmasSmartTree
2- 2 layers168 × 133 mm

- 2 layers

Similar boards
- 2 layers115 × 115 mm

- 2 layers38 × 56 mm

- 2 layers50 × 50 mm

Rfid uhf wifi reader
OpenLaundry/wifi-rfid-uhf-reader
Portable long range RFID uhf reader with WIFI based on esp32
23 parts8 - 2 layers141 × 56.9 mm

- 2 layers141 × 56.9 mm

- 2 layers97 × 97 mm

- 2 layers100 × 100 mm

- 2 layers27 × 40.3 mm

Panasonic aircon
jnicolson/panasonic_ac_wifi
Module to interface with the CN-CNT port on Panasonic airconditioner units
26 parts28CC-BY-4.0
Questions
How big is the Tree PCB?
It measures 150 × 120 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tree use?
25 parts, built around the ESP32-WROOM-32, WS2812B and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tree KiCad files?
From the theloukou/xmasSmartTree repository on GitHub, at the commit this page was made from: the board is PCB/tree/tree.kicad_pcb and its schematic PCB/base/base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tree design in my own project?
Its repository states no licence, so its author keeps all rights: ask theloukou before reusing the design.