2 layers216.9 × 86.8 mm
Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
51 parts2.1k
2 layers59.6 × 74.4 mm
Craft qtpy
theleadingzero/smart-pillow5Resources to construct an e-textile, touch-sensitive pillow to control streaming audio/video with Arduino and Trill Craft.
- Size
- 59.6 × 74.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 46
- Pads
- 126
- Tracks, vias
- 84, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 May 2022
- Updated
- 20 Oct 2022
Overview
Craft qtpy is an open-source printed circuit board by theleadingzero, from the theleadingzero/smart-pillow repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 59.6 × 74.4 mm with 51 parts on 46 nets, routed with 84 tracks and 0 vias.
README
README.mdsmart-pillow
Resources to construct an e-textile, touch-sensitive pillow to control streaming audio/video with Arduino and Trill Craft.
See the wiki for full documentation.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | 0, 2, 3, 5, 11, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 29 +2 |
| 2 | Conn_01x07_Female | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | QTPy-Left1, QTPy-Right1 |
| 2 | Conn_01x15_Female | trill-craft:1X15 | Craft-0-14, Craft-15-29 |
| 2 | Conn_01x15_Male | trill-craft:1X15 | Wires-Out-Left1, Wires-Out-Right1 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 10KR1, 10KR2 |
| 1 | Conn_01x06_Female | trill-craft:1X06 | Craft-I2C1 |
The 27 most common of 51 parts.
Questions
How big is the Craft qtpy PCB?
It measures 59.6 × 74.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Craft qtpy use?
51 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Craft qtpy KiCad files?
From the theleadingzero/smart-pillow repository on GitHub, at the commit this page was made from: the board is pcb/craft-qtpy.kicad_pcb and its schematic pcb/craft-qtpy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Craft qtpy design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers49.4 × 94.2 mm
- 2 layers72 × 42 mm
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.
51 parts1kMIT - 2 layers170 × 162 mm
Snowflake
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
51 parts915 - 2 layers33 × 50 mm
- 2 layers
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
51 parts530 - 2 layers45.7 × 123.5 mm
- 2 layers50.8 × 69.2 mm
Uikit
vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
51 parts341Apache-2.0