2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers42.5 × 124.5 mm
GexUSB
TheLastBilly/GexUSB4An unofficial remake of the USB Gecko for the Nintendo Wii using the Raspberry PI PICO
- Size
- 42.5 × 124.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 57
- Pads
- 130
- Tracks, vias
- 109, 7
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Sep 2023
- Updated
- 21 Sep 2023
Overview
GexUSB is an open-source printed circuit board by TheLastBilly, from the TheLastBilly/GexUSB repository on GitHub. It is a 2-layer board of 42.5 × 124.5 mm with 10 parts on 57 nets, routed with 109 tracks and 7 vias.
Its parts include 3 resistors, 3 diodes, 3 connectors and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mdGexUSB
A remake of the USB Gecko using a Raspberry PI PICO
Credits
- Yet another USB Gecko clone
- VHDL used as a guide
- Kicad symbols and footprint for GameCube MEMCARD
- mcu-starter-projects
- Linker script and initial Makefile
- tools/bin2uf2
- KiCad-RP-Pico
- Kicad symbol and footprint for Raspberry PI PICO
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 220 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3 |
| 1 | Memcard | gecko:GC_MEMCARD | J2 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
Questions
How big is the GexUSB PCB?
It measures 42.5 × 124.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GexUSB use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GexUSB KiCad files?
From the TheLastBilly/GexUSB repository on GitHub, at the commit this page was made from: the board is kicad/gex_usb.kicad_pcb and its schematic kicad/gex_usb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GexUSB design in my own project?
Its repository states no licence, so its author keeps all rights: ask TheLastBilly before reusing the design.
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0