TheCodeSharman/EnclosureCustom enclosure frame pieces
Heater control pcb is an open-source printed circuit board by TheCodeSharman, from the TheCodeSharman/Enclosure repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 101 × 61.6 mm with 28 parts on 58 nets, routed with 143 tracks and 0 vias.
It is built around the LM1117DT-3.3 and RFP30N06LE-VB. Its parts include 10 resistors, 4 diodes, 4 transistors, 4 connectors and 2 ICs. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 470 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4 |
| 4 | 680 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5, R6, R7, R8 |
| 4 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4 |
| 4 | RFP30N06LE | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 2 | 4k7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9, R11 |
| 1 | I2C | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U2 |
| 1 | OUTPUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-5.0-H_1x08_P5.00mm_Horizontal | J4 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | SWD | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J3 |
| 1 | ~ | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
The 24 most common of 28 parts.
It measures 101 × 61.6 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the LM1117DT-3.3 and RFP30N06LE-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TheCodeSharman/Enclosure repository on GitHub, at the commit this page was made from: the board is HeaterControl/heater_control_pcb/heater_control_pcb.kicad_pcb and its schematic HeaterControl/heater_control_pcb/heater_control_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
ortlof/magnet-selfbondage
1x LILYGO TTGO T1 ESP32 1x Keeppower 18650 3400mAh (Protected) 1x 1A Micro USB 18650 https://www.amazon.de/TECNOIOT-Lithium-Battery-Charging-Charger/dp/B07T52KGDT 1x MT3608 DC-DC Netzteil 1x MOSFET N-CH IRL1404ZPBF-ND…
gongminmin/AtmosphericWaterGenerator
An open source design of an atmospheric water generator
jkasari/bikeLightsPCB
The Schematic and PCB layout for the bikelights on my commuter bike.
SimonDaniel605/Hydrogel-3D-Printer
Development of a custom hydrogel 3D printer for tissue engineering and research applications for Stellenbosch University.
QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack
