
Desktop Thermometer USB-2
TheBrokenEngineer/Desktop-Thermometer
A small destop thermometer that just sits there and works

A small destop thermometer that just sits there and works
PIC16F15214 Debugger is an open-source printed circuit board by TheBrokenEngineer, from the TheBrokenEngineer/Desktop-Thermometer repository on GitHub. It is a 2-layer board of 24.1 × 30.5 mm with 5 parts on 9 nets, routed with 16 tracks and 0 vias.
It is built around the PIC16F15214-E/P and AOI21357. Its parts include 2 connectors, 1 IC and 1 transistor. It belongs with the sensors and measurement and interfaces and adapters boards and the PIC boards of this library.
A small desktop thermometer that just sits there and works. It acquires the ambient air temperature and shows the current temperature on 3 7-segment LED displays.
Designed to be low cost (under USD20) and be powered by a computer USB port, USB wall wart or power bank.
At the heart is a Microchip PIC16 microcontroller that reads the voltage produced by the sense pin on the TMP36/TMP37 sensor and shifts the converted value out to the display using 74HC595 shift registers. For full details of the device please refer to the documentation contained in the Documentation directory.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 2-Pin Terminal | Footprints:Wurth 2 Pin Screwless Entry Wire to Board Connector | J1 |
| 1 | 5-Pin-Header | Footprints:5-Pin-Header | J2 |
| 1 | AOI21357 | Footprints:AOI21357 | Q1 |
| 1 | LOGO | Footprints:TBE Logo Small | G*** |
| 1 | PIC16F15214 | Footprints:DIP-8_W7.62mm_Socket_Wire_Wrap | U1 |

TheBrokenEngineer/Desktop-Thermometer
A small destop thermometer that just sits there and works

richardhoman99/Single-Board-Computer
CPGR4253 Microcomputer Design is not as much a technical course at LeTourneau University as it is a design project.


joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 24.1 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the PIC16F15214-E/P and AOI21357. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TheBrokenEngineer/Desktop-Thermometer repository on GitHub, at the commit this page was made from: the board is Hardware/PIC16F15214 Debugger/PIC16F15214 Debugger.kicad_pcb and its schematic Hardware/Desktop Thermometer USB-2/Desktop Thermometer USB-2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TheBrokenEngineer before reusing the design.