Skip to the content
2 layers78.7 × 87.6 mmDesktop Thermometer USB-2, the printed circuit board in 3D

Desktop Thermometer USB-2

TheBrokenEngineer/Desktop-Thermometer

A small destop thermometer that just sits there and works

Size
78.7 × 87.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
60
Pads
153
Tracks, vias
160, 4
Pours
145
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
5 Feb 2024
Updated
28 Feb 2024

Overview

Desktop Thermometer USB-2 is an open-source printed circuit board by TheBrokenEngineer, from the TheBrokenEngineer/Desktop-Thermometer repository on GitHub. It is a 2-layer board of 78.7 × 87.6 mm with 40 parts on 60 nets, routed with 160 tracks and 4 vias.

It is built around the PIC16F15214-E/P and 74HC595. Its parts include 23 resistors, 5 capacitors, 5 ICs, 3 diodes and 1 connector. It belongs with the sensors and measurement boards and the PIC boards of this library.

Main components

2

README

README.md

Desktop-Thermometer

A small desktop thermometer that just sits there and works. It acquires the ambient air temperature and shows the current temperature on 3 7-segment LED displays.

Designed to be low cost (under USD20) and be powered by a computer USB port, USB wall wart or power bank.

At the heart is a Microchip PIC16 microcontroller that reads the voltage produced by the sense pin on the TMP36/TMP37 sensor and shifts the converted value out to the display using 74HC595 shift registers. For full details of the device please refer to the documentation contained in the Documentation directory.

Parts

40
QtyValueFootprintReferences
224K7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 +6
5100nFootprints:C_Epoxy_D5.5mm_W3.2mm_P5.00mmC1, C2, C3, C4, C5
374HC595Footprints:DIP-16_W7.62mm_LongPadsU1, U2, U3
3LED-7-SEGFootprints:LED-7-SEGD1, D2, D3
110KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR23
1LOGOFootprints:TBE Logo SmallG***
1PIC16F15214Footprints:DIP-8_W7.62mm_LongPadsU5
1TMP3xFootprints:TMP3x_TO-92U4
1USB_TYPE_BFootprints:USB_TYPE_BJ1

The 38 most common of 40 parts.

More from TheBrokenEngineer/Desktop-Thermometer

1
  • 2 layers24.1 × 30.5 mmPIC16F15214 Debugger, the printed circuit board in 3D

    PIC16F15214 Debugger

    TheBrokenEngineer/Desktop-Thermometer

    A small destop thermometer that just sits there and works

    5 parts

Similar boards

  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers228.6 × 100 mmMongus48, the printed circuit board in 3D

    Mongus48

    ChrisChrisLoLo/beyblock20

    The magnetic, modular, 20-key macropad that can join together to form an ortholinear board

    124 parts335GPL-3.0
  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers100 × 95.1 mmProtoboard-6x4-breakout, the printed circuit board in 3D

    Protoboard-6x4-breakout

    electroniceel/protoboard

    Advanced protoboard layout with 1.27mm pitch for smd parts

    4,745 parts311CC-BY-4.0
  • 4 layers140 × 100 mmDc usv, the printed circuit board in 3D

    Dc usv

    TobleMiner/DC-UPS

    A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages

    351 parts223CERN-OHL-P-2.0
  • 2 layers100.5 × 218.3 mmTraktorino, the printed circuit board in 3D

    Traktorino

    silveirago/traktorino

    The open-source DIY MIDI Controller for DJs.

    96 parts220
  • 2 layers287.8 × 126.7 mmNoName, the printed circuit board in 3D

    NoName

    AlaaSaadAbdo/battoota

    Keyboards

    267 parts188
  • 2 layers100 × 100 mmTommyPROM32-595, the printed circuit board in 3D

    TommyPROM32-595

    TomNisbet/TommyPROM

    Simple Arduino-based EEPROM programmer

    36 parts187

Questions

How big is the Desktop Thermometer USB-2 PCB?

It measures 78.7 × 87.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Desktop Thermometer USB-2 use?

40 parts, built around the PIC16F15214-E/P and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Desktop Thermometer USB-2 KiCad files?

From the TheBrokenEngineer/Desktop-Thermometer repository on GitHub, at the commit this page was made from: the board is Hardware/Desktop Thermometer USB-2/Desktop Thermometer USB-2.kicad_pcb and its schematic Hardware/Desktop Thermometer USB-2/Desktop Thermometer USB-2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Desktop Thermometer USB-2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask TheBrokenEngineer before reusing the design.