

Turbo tornado
Remote control car retrofit
- Size
- 74 × 47.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 62
- Pads
- 217
- Tracks, vias
- 509, 98
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Sep 2024
- Updated
- 9 Oct 2024
Overview
Turbo tornado is an open-source printed circuit board by thebeekeeper, from the thebeekeeper/turbo-tornado repository on GitHub, published under the MIT licence. It is a 2-layer board of 74 × 47.3 mm with 45 parts on 62 nets, routed with 509 tracks and 98 vias.
It is built around the ESP32-S3-MINI-1U-N8, A3909GLNTR-T and UCW1H221MNL1GS. Its parts include 15 capacitors, 10 resistors, 6 ICs, 2 diodes and 2 transistors. It belongs with the ESP32 boards of this library.
Main components
3ESP32-S3-MINI-1U-N8
VFQFN-56-EP-40℃~+105℃ -98.4dBm 1.8V~3.6V、3V~3.6V 2.4GHz 21dBm 340mA 88mA Bluetooth5.0 ESP32-S3 UART、SDIO、SPI、I2C、I2S、JTAG、USB VFQFN-56-EP WiFi Modules ROHSEspressif SystemsWiFi ModulesA3909GLNTR-T
SSOP-10-150mil-40℃~+105℃ 1A 1、2 2 480mΩ 4V~18V 4V~18V Bipolar Driver Yes SSOP-10-150mil Stepper Motor Driver ROHSAllegro MicroSystems, LLCStepper Motor DriverUCW1H221MNL1GS
SMD,D10xL10mm-25℃~+105℃ 10mm 10mm 220uF 335mA@120Hz 50V 7000hrs@105℃ Polarized ±20% SMD,D10xL10mm Aluminum Electrolytic Capacitors - SMD ROHSNichiconAluminum Electrolytic Capacitors - SMD
README
README.mdTURBO TORNADO
When I was a kid I had a RC car that I really liked to play with, but it pretty rarely worked. 30+ years later I have a couple of decades of experience building embedded systems to control motors and stuff like that so I decided to design replacement electronics for it so my kid can play with it.
To start, I took the top off the car and removed the old PCB. Here's what we see under there:

We've got leads to the coil that controls steering and some on the other end to the drive motor. On the bottom there are 6 slots for AA batteries, so I'm assuming the motor and solenoid will work off 9V. I checked this by connecting a 9V battery to both pairs of leads and saw that the steering and drive motor still work. To change direction of both actuators, you can just reverse polarity on the battery.
What I really want to do with this project is put a camera where that guys head is supposed to be. I've always wanted a first person view when driving the car around.
Parts Selection
The features I'm designing for are:
- Video streaming to some remote device
- Wireless control
- Ability to drive two inductive loads with PWM
I've been using esp32 devices at work for a while, so I decided on the ESP32-S3-MINI-1U-N8. I found the schematic for the esp32-cam board here and it looks pretty straightforward to wire to an FPC connector for a standard camera. It also supports Bluetooth and WiFi, so I'll have some options for wireless control and video streaming. I've read that it has issues with video quality when using the chip antenna, so I'll plan on using an external antenna.
To drive the motor and solenoid I was initially planning to build couple of standard H-bridge circuits, but then I found A3909GLNTR which is an IC with the exact circuit I'd be building anyway so I decided to use that. I've used some Allegro parts in other designs and they've worked well, so this should be pretty easy.
Got the rev0 boards back an assembled and the drive motor just whines and doesn't turn! Tried adding some capacitance but that didn't really help. I can't find any specs for the motor that's installed on the machine so I'm guessing the driver IC isn't able to source the stall current for the motor when it's connected to the gearbox. I tested the driver with a motor I have lying around with no mechanical load on it and it worked fine. The A3909GLNTR datasheet says you can parallel the outputs to get more current. Tried that and it starts up the motor and runs no problem. Added a second driver IC and updated the layout for a rev1 board.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C6, C8, C10, C13, C14 |
| 6 | TestPoint | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad_TopBottom | TP1, TP2, TP3, TP4, TP7, TP8 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C7, C9 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | A3909GLNTR-T | footprints:SOP100P600X175-10N | IC1, IC2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U3, U4 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 10uH | footprints2:SRN3010C2R2M | L1 |
| 1 | 15pF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 22.1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 51k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x24 | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J1 |
| 1 | ESP32-S3-MINI-1U | RF_Module:ESP32-S2-MINI-1U | U1 |
| 1 | TPS560430YDBVR | footprints2:DBV0006A_L | U2 |
| 1 | UCW1H221MNL1GS | footprints2:UCW1H221MNL1GS | C15 |
| 1 | ~ | footprints:bird | L2 |
Similar boards
- 2 layers53.2 × 98.4 mm

- 4 layers120 × 65 mm

Flip segment clock main board
joshbohm37/Flip-segment-clock
A breakout board used for driving 1 inch 7 segment electromechanical displays. Built around the A3909.
113 parts - 2 layers140.6 × 25.9 mm

ESP32 SmartGlass
jobitjoseph/ESP32-AI-SmartGlass
The ESP32 AI Smartglass is an innovative wearable device that blends the power of artificial intelligence with the convenience of home automation.
47 parts16 - 4 layers154.5 × 112.9 mm

LibrePLC32
AndreiVladescu/LibrePLC32
The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.
295 parts14CERN-OHL-P-2.0 - 6 layers100 × 60 mm

Aether
nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.
180 parts10 - 2 layers50.2 × 95.2 mm

- 2 layers30.1 × 59.9 mm

- 6 layers90 × 90 mm

Cansat
DevKiDCosmo/SATELLITE-EDGE-MODULE
A satellite edge module ready for competition
220 parts2GPL-3.0
Questions
How big is the Turbo tornado PCB?
It measures 74 × 47.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Turbo tornado use?
45 parts, built around the ESP32-S3-MINI-1U-N8, A3909GLNTR-T and UCW1H221MNL1GS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Turbo tornado KiCad files?
From the thebeekeeper/turbo-tornado repository on GitHub, at the commit this page was made from: the board is board/rc.kicad_pcb and its schematic board/rc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Turbo tornado design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).