
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Sallen Key PCB - KiCAD
LPF is an open-source printed circuit board by ThangNguyen-AD, from the ThangNguyen-AD/PCB repository on GitHub. It is a 2-layer board of 55.9 × 32.5 mm with 13 parts on 10 nets, routed with 56 tracks and 0 vias.
It is built around the TL072. Its parts include 6 capacitors, 3 resistors, 3 connectors and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | AudioJack2 | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J1, J2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 100u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 2,2nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm | U1 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 55.9 × 32.5 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ThangNguyen-AD/PCB repository on GitHub, at the commit this page was made from: the board is LPF.kicad_pcb and its schematic LPF.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ThangNguyen-AD before reusing the design.