

Drone
Personal Project
- Size
- 49.5 × 49.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 90
- Pads
- 316
- Tracks, vias
- 0, 25
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Jun 2025
- Updated
- 10 Sep 2026
Overview
Drone is an open-source printed circuit board by tguyenn, from the tguyenn/drone-swarm repository on GitHub. It is a 4-layer board of 49.5 × 49.5 mm with 89 parts on 90 nets.
It is built around the ESP32-S3, TPS63000IDRCRQ1 and BMI323, with the IRLML6344, IRLML6402TRPBF and FH4000074Z among its other parts. Its parts include 20 capacitors, 17 resistors, 11 diodes, 6 transistors and 4 ICs. It belongs with the robots and motor control boards and the ESP32 boards of this library.
Main components
9ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsTPS63000IDRCRQ1
VSON-10-EP(3x3)-40℃~+125℃@(TJ) 1 1.2V~5.5V 1.5MHz 1.8V~5.5V 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersBMI323
LGA-14-40℃~+85℃ IMU (accelerometer + gyroscope) Motion event detection LGA-14 Accelerometers ROHSBosch SensortecAccelerometersIRLML6344
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC@4.5V 650pF SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsIRLML6402TRPBF
SOT-23-55℃~+150℃ 1 P-Channel 1.7W 190pF 1V 20V 290pF 4.1A 7.8nC@4.5V 740pF 75mΩ@2.5V SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsFH4000074Z
SMD2520-4P-30℃~+85℃ 30Ω 40MHz 8pF ±10ppm ±10ppm SMD2520-4P Crystals ROHSDiodes IncorporatedCrystalsSM0605RGB
0605RGB LEDsBIVARSMF5.0A_R1_00001
SOD-123FL-55℃~+150℃ 200W 200uA 21.7A 5V 6.4V 9.2V IEC 61000-4-2 TVS SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSPANJIT InternationalESD And Surge Protection (TVS/ESD)USBLC6-4SC6Y
SOT-23-6L-40℃~+150℃ 10nA 17V 3pF 5.25V 6V ESD Four channels SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdDrone Swarm
WIP
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | SamacSys_Parts:RESC2012X60N | R6, R7, R8, R9, R10, R11, R12, R13, R14, R16 |
| 8 | u1 | SamacSys_Parts:MAJx16 | C3, C5, C14, C15, C16, C17, C18, C20 |
| 4 | 10u | SamacSys_Parts:CAPC1608X80N | C4, C6, C7, C11 |
| 4 | 1N4148WQ-7-F | SamacSys_Parts:SOD3716X145N | D5, D6, D7, D8 |
| 4 | IRLML6344 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 100 | SamacSys_Parts:RESC1608X55N | R1, R15, R17 |
| 3 | 1u | SamacSys_Parts:CAPC2012X135N | C1, C2, C13 |
| 2 | 10p | SamacSys_Parts:CAPC2013X94N | C8, C10 |
| 2 | 1p8 | Capacitor_SMD:C_0603_1608Metric | C9, C12 |
| 2 | 5k1 | SamacSys_Parts:RESC1608X50N | R4, R5 |
| 2 | IRLML6402TRPBF | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 2 | LM66100DCKR | SamacSys_Parts:SOP65P210X110-6N | D2, D3 |
| 2 | LO_M676-Q2S1-24-Z | SamacSys_Parts:LEDM2214X140N | LED2, LED3 |
| 1 | 100 Ohms | SamacSys_Parts:EXBU38 | RN1 |
| 1 | 1769 | SamacSys_Parts:1769 | J1 |
| 1 | 1M | SamacSys_Parts:RESC1608X55N | R2 |
| 1 | 200k | SamacSys_Parts:RESC1608X55N | R3 |
| 1 | 2nH | SamacSys_Parts:WE-KI_0603A30 | L3 |
| 1 | 2u2 | SamacSys_Parts:NRS3015T2R2MNGHV | L1 |
| 1 | 3V3_TP | SamacSys_Parts:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | 3nH | SamacSys_Parts:INDC1006X65N | L2 |
| 1 | 4u7 | SamacSys_Parts:CAPC1608X90N | C19 |
| 1 | A+ | SamacSys_Parts:Motor solder point | TP7 |
| 1 | A- | SamacSys_Parts:Motor solder point | TP6 |
| 1 | Antenna_Chip | SamacSys_Parts:AANI-CH-0133 | AE1 |
| 1 | B+ | SamacSys_Parts:Motor solder point | TP9 |
| 1 | B- | SamacSys_Parts:Motor solder point | TP8 |
| 1 | BATV_TP | SamacSys_Parts:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | BMI323 | SamacSys_Parts:BMI323 | IC2 |
| 1 | BOOT | SamacSys_Parts:TL1030AF500AQJ | S1 |
| 1 | BUCK_VIN_TP | SamacSys_Parts:TestPoint_Pad_1.0x1.0mm | TP5 |
| 1 | B_TP | SamacSys_Parts:TestPoint_Pad_1.0x1.0mm | TP16 |
| 1 | C+ | SamacSys_Parts:Motor solder point | TP11 |
| 1 | C- | SamacSys_Parts:Motor solder point | TP10 |
| 1 | D+ | SamacSys_Parts:Motor solder point | TP13 |
| 1 | D- | SamacSys_Parts:Motor solder point | TP12 |
| 1 | ESP32-S3 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U1 |
| 1 | FH4000074Z | SamacSys_Parts:FH4000074Z | Y1 |
| 1 | GND_TP | SamacSys_Parts:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | G_TP | SamacSys_Parts:TestPoint_Pad_1.0x1.0mm | TP15 |
| 1 | LPS25HBTR | SamacSys_Parts:LPS25HBTR | IC3 |
| 1 | NetTie | SamacSys_Parts:custom_net_tie | NT1 |
| 1 | RESET | SamacSys_Parts:TL1030AF500AQJ | S2 |
| 1 | R_TP | SamacSys_Parts:TestPoint_Pad_1.0x1.0mm | TP14 |
| 1 | SM0605RGB | SamacSys_Parts:SM0605RGB | LED1 |
| 1 | SMF5.0A_R1_00001 | SamacSys_Parts:SMF50A_R1_00001 | D1 |
| 1 | TPS63000IDRCRQ1 | SamacSys_Parts:TPS63000IDRCRQ1 | IC1 |
| 1 | USBLC6-4SC6Y | SamacSys_Parts:SOT95P280X145-6N | D4 |
| 1 | USBV_TP | SamacSys_Parts:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | ~ | SamacSys_Parts:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
More from tguyenn/drone-swarm
1- 4 layers114 × 95.1 mm

Similar boards
- 4 layers30 × 37.3 mm

- 4 layers36 × 65 mm

Uwb beacon
dan-stefanov/locatof-hw
Open-source localization project based on UWB Time-of-Flight ranging
111 partsCERN-OHL-P-2.0 - 4 layers70 × 100 mm

- 2 layers137.9 × 92.7 mm

ErgoTravel
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
71 parts100BSD-3-Clause - 6 layers205 × 130 mm

BenchyMotherBoard PI
Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!
612 parts2AGPL-3.0 - 4 layers28 × 98.2 mm

ESP32-PoE ISO Rev N1
OLIMEX/ESP32-POE-ISO
ESP32 Power Over Ethernet board with 3000VDC Galvanic insulation
146 parts145 - 2 layers39 × 70 mm

- 4 layers60 × 60 mm

3117 AUSIGN
r4hulrr/ausign
Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.
151 parts3MIT
Questions
How big is the Drone PCB?
It measures 49.5 × 49.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Drone use?
89 parts, built around the ESP32-S3, TPS63000IDRCRQ1, BMI323 and IRLML6344. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Drone KiCad files?
From the tguyenn/drone-swarm repository on GitHub, at the commit this page was made from: the board is hardware/flight_controller/drone.kicad_pcb and its schematic hardware/flight_controller/BUTTONS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Drone design in my own project?
Its repository states no licence, so its author keeps all rights: ask tguyenn before reusing the design.