

Single Joint Control Board
- Size
- 160 × 115 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 346
- Nets
- 241
- Pads
- 998
- Tracks, vias
- 1,377, 1,024
- Pours
- 146
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 May 2023
- Updated
- 23 Apr 2026
Overview
Sjc is an open-source printed circuit board by tgiacomellibr, from the tgiacomellibr/sjc repository on GitHub, published under the MIT licence. It is a 4-layer board of 160 × 115 mm with 346 parts on 241 nets, routed with 1,377 tracks and 1,024 vias.
It is built around the FAN7382N, 74LVC2T45DC and BSC0902NSI, with the NCP1117DT33, SN74LVC1G04DBVR and SN74LVC2G04DBV among its other parts. Its parts include 120 resistors, 93 capacitors, 30 ICs, 11 diodes and 8 connectors.
Main components
12FAN7382N
DIP-8-40℃~+125℃ 10V~20V 2 20ns 30ns 350mA 650mA 70uA Enable shutdown Half-Bridge IGBT、MOSFET DIP-8 Gate Drivers ROHSonsemiGate Drivers74LVC2T45DC
VSSOP-8-0.5mm-40℃~+125℃ 1 1.2V~5.5V 1.2V~5.5V 2 420Mbps Bidirectional Power-Off Protection Tri-State VSSOP-8-0.5mm Translators, Level Shifters ROHSNexperiaTranslators, Level ShiftersBSC0902NSI
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 2.8mΩ@10V 24nC@10V 2V 2nF 30V 48W 88pF 89A TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsNCP1117DT33
DPAK3.3V 1A Low-Dropout Positive Voltage RegulatoronsemiUncategorisedSN74LVC1G04DBVR
SOT-23-5-40℃~+125℃ 1 1 1.2V、1.9V、2.2V、2.3V、3.8V 1.65V~5.5V 100mV、300mV、400mV、450mV、550mV 10uA 24mA 24mA 74LVC 7ns@5V,50pF SOT-23-5 Inverters ROHSTECH PUBLICLogic GatesSN74LVC2G04DBV
SOT-23-6-40℃~+85℃ 1.65V~5.5V 1.7V~2V 10uA 2 2 2.4V 3.2ns@5V,50pF 32mA 32mA 550mV 700mV~800mV 74LVC 电源关断保护 SOT-23-6 Inverters ROHSTexas InstrumentsInvertersTLP291-4
SOIC16Quad Channel Optocoupler, Phototransistor OutputToshibaUncategorisedNCP1117DT50
DPAK5V 1A Low-Dropout Positive Voltage RegulatoronsemiUncategorisedPTVS5V0S1UR
SOD-123Unidirectional Transient Voltage SuppressorNexperiaUncategorisedPMEG60T10ELRX
SOD-123W-65℃~+150℃ 1A 600mV@1A 60V 650nA@60V Independent SOD-123W Schottky Diodes ROHSNexperiaSchottky DiodesPTVS12VS1UR
SOD-123W-55℃~+150℃ 12V 13.3V 19.9V 2.5uA 20.1A 400W IEC 61000-4-2 TVS Unidirectional SOD-123W ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)NDS7002A
SOT-23-3L-65℃~+150℃ 1 N-channel 1.2Ω@10V 11pF 2.5V 280mA 300mW 4pF 50pF 60V N-Channel SOT-23-3L MOSFETs ROHSonsemiMOSFETs
README
README.mdSingle Joint Control Board (SJC)
- 3 Encoder inputs
- 2 Isolated inputs
- 2 Endstop inputs
- 2 Digital outputs
- Servomotor interface with current sense and pwm output
Communication library:
-
Install packages and deps.:
text sudo apt update sudo apt install build-essential git g++ cmake manpages-dev nlohmann-json3-dev sudo apt install libmodbus-dev -
Acquire SJC packages:
text git clone https://github.com/tgiacomellibr/sjc.git -
Create build directory:
text cd sjc/software mkdir -p build && cd build -
Configure, compile and install system-wide (default prefix
/usr/local):text cmake .. make sudo make install sudo ldconfigTo install in a custom location instead, pass
-DCMAKE_INSTALL_PREFIX=/path/to/installtocmake(e.g.$HOME/.local). In that casesudois not required and you may need to extendLD_LIBRARY_PATH/CMAKE_PREFIX_PATHto find the library.
Parts
346| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 100nF 5% 50V | Capacitor_SMD:C_0603_1608Metric | C3, C20, C21, C23, C24, C25, C27, C28, C29, C36, C39, C43, C46, C54, C55, C56 +23 |
| 27 | 33R 1% | Resistor_SMD:R_0603_1608Metric | R17, R18, R19, R20, R27, R28, R51, R52, R63, R64, R108, R109, R110, R111, R112, R113 +11 |
| 16 | 2k7 1% | Resistor_SMD:R_0603_1608Metric | R8, R15, R16, R22, R53, R54, R55, R56, R61, R62, R87, R94, R95, R118, R119, R120 |
| 15 | 100k 1% | Resistor_SMD:R_0603_1608Metric | R1, R3, R5, R6, R13, R36, R37, R41, R42, R76, R81, R85, R104, R114, R117 |
| 15 | 10uF 10% 50V | Capacitor_SMD:C_1206_3216Metric | C2, C6, C11, C12, C13, C17, C18, C19, C31, C35, C42, C48, C75, C76, C79 |
| 14 | 220R 3A | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8, FB9, FB10, FB11, FB12, FB13, FB14 |
| 12 | 1uF 10% 50V | Capacitor_SMD:C_1206_3216Metric | C14, C15, C32, C49, C50, C51, C71, C74, C77, C81, C83, C87 |
| 11 | 1k 1% | Resistor_SMD:R_0603_1608Metric | R2, R21, R59, R60, R75, R80, R86, R96, R97, R105, R116 |
| 10 | 10nF 5% 50V | Capacitor_SMD:C_0603_1608Metric | C26, C30, C40, C47, C63, C64, C85, C90, C91, C92 |
| 8 | PTVS5V0S1UR | Diode_SMD:D_SOD-123 | TV2, TV5, TV7, TV8, TV9, TV10, TV12, TV13 |
| 7 | 1.8V @ 5mA | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LD1, LD2, LD3, LD4, LD5, LD6, LD7 |
| 6 | 1.02k 0.1% | Resistor_SMD:R_0603_1608Metric | R26, R35, R38, R40, R43, R50 |
| 6 | 74LVC2T45DC | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U6, U8, U21, U22, U23, U24 |
| 6 | PMEG60T10ELR | Diode_SMD:D_SOD-123F | D4, D5, D6, D7, D9, D10 |
| 6 | PTVS12VS1UR | Diode_SMD:D_SOD-123 | TV4, TV6, TV11, TV16, TV17, TV18 |
| 6 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | SB3, SB5, SB6, SB8, SB11, SB17 |
| 5 | 2k 5% | Resistor_SMD:R_0603_1608Metric | R10, R77, R78, R79, R82 |
| 5 | ~ | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | SB2, SB4, SB7, SB9, SB10 |
| 4 | 130R 1% 1W | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R32, R34, R45, R47 |
| 4 | 2.4R 1% 1W | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R31, R33, R44, R46 |
| 4 | 39nF 5% 50V | Capacitor_SMD:C_0603_1608Metric | C37, C38, C41, C44 |
| 4 | BSC0902NSI | Package_TO_SOT_SMD:TDSON-8-1 | U13, U14, U16, U17 |
| 4 | E-STOP_DIV | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP4, JP5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3, H4 |
| 4 | NDS7002A | Package_TO_SOT_SMD:SOT-23 | Q2, Q5, Q6, Q8 |
| 4 | PMEG60T20ELR | Diode_SMD:D_SOD-123F | D1, D3, D8, D11 |
| 4 | TLV9051 | Package_TO_SOT_SMD:SOT-23-5 | U7, U10, U15, U19 |
| 3 | 1.5k 1% | Resistor_SMD:R_0603_1608Metric | R57, R58, R90 |
| 3 | 10k 1% | Resistor_SMD:R_0603_1608Metric | R14, R23, R107 |
| 3 | 160R 5% 1/8W | Resistor_SMD:R_0603_1608Metric | R88, R89, R93 |
| 3 | 22nF 5% 50V | Capacitor_SMD:C_0603_1608Metric | C34, C52, C53 |
| 3 | 330R 1% | Resistor_SMD:R_0603_1608Metric | R12, R106, R115 |
| 3 | 6N137 | Package_DIP:SMDIP-8_W7.62mm | U29, U30, U31 |
| 3 | 82k 0.1% | Resistor_SMD:R_0603_1608Metric | R4, R7, R102 |
| 2 | 1.6k 5% 1W | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R73, R74 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R29, R49 |
| 2 | 10R 1% 1/2W | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R99, R100 |
| 2 | 22R 1% | Resistor_SMD:R_0603_1608Metric | R91, R92 |
| 2 | 22uF 10% 25V | Capacitor_SMD:C_1206_3216Metric | C4, C16 |
| 2 | 2R 5% 2W | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R30, R48 |
| 2 | 47uF 63V 20% | Capacitor_SMD:CP_Elec_8x10.5 | C1, C10 |
| 2 | 680uF 63V 20% | Capacitor_SMD:CP_Elec_18x17.5 | C5, C7 |
| 2 | 82nF 5% 50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C33, C45 |
| 2 | FAN7382 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11, U20 |
| 2 | NCP1117DT33 | Package_TO_SOT_SMD:TO-252-2 | U5, U35 |
| 2 | PTVS30VS1UR | Diode_SMD:D_SOD-123 | TV14, TV15 |
| 2 | PTVS3V3S1UR | Diode_SMD:D_SOD-123 | TV3, TV20 |
| 2 | PWR-DRV | sjc:NetTie-2_SMD_Pad2.0mm | NT1, NT2 |
| 2 | SI7149ADP | sjc:PowerPAK_SO-8_Single | Q1, Q3 |
| 2 | SN74LVC1G04DBVR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1, U32 |
| 2 | SN74LVC2G04 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U25, U28 |
| 2 | TLP291 | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U26, U27 |
| 1 | 120R 0.1% 1/8W | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R103 |
| 1 | 12nF 5% 50V | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 25A 32V | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 270R 0.1% | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 3V3_OSC | NetTie:NetTie-2_SMD_Pad0.5mm | NT3 |
| 1 | 4.7uF 10% 20V | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder | C89 |
| 1 | 47k 0.1% | Resistor_SMD:R_0603_1608Metric | R101 |
| 1 | 5.62k 5% 250mW | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 510R 0.1% | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 60V 100mA | Fuse:Fuse_1206_3216Metric | F2 |
| 1 | 680R 1% | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 8mR 1% 2W | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R39 |
| 1 | ACS712-20A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U12 |
| 1 | AD8418 | Package_SO:MSOP-8_3x3mm_P0.65mm | U18 |
| 1 | AMPHENOL_10118194-0001LF | sjc:AMPHENOL_10118194-0001LF | J8 |
| 1 | Aux. encoders | sjc:Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J4 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q7 |
| 1 | CS_SEL | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | SB1 |
| 1 | GND_OSC | NetTie:NetTie-2_SMD_Pad0.5mm | NT4 |
| 1 | Isolated Inputs | sjc:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J6 |
| 1 | Joint encoders | sjc:Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J5 |
| 1 | Motor | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | NCP1117DT50 | Package_TO_SOT_SMD:TO-252-2 | U4 |
| 1 | Outputs | sjc:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J7 |
| 1 | PROG_{DBG} | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J10 |
| 1 | RS-485 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-4-5.08_1x04_P5.08mm_Horizontal | J9 |
| 1 | RS-485 TERM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
The 335 most common of 346 parts.
Similar boards
- 2 layers162 × 120 mm

- 2 layers99.1 × 61 mm

Huge Stepper Driver
lisasnt/HSD-RP2040-5-stepper-motor-driver
Custom PCB with RP2040 and Stepper Drivers
105 parts1 - 2 layers120 × 90 mm

- 4 layers68.6 × 53.3 mm

Pcb main nautilus atmega4809
apcountryman/pcb-main-nautilus-atmega4809
A Microchip ATmega4809 based mainboard PCB.
91 parts - 2 layers50.4 × 69 mm

PLRD1 24ChRelayDriver
robertpuccinelli/microfluidic_controller_reviewer_copy
This repository contains supplementary information and resources for a microfluidic controller platform based on the plfluidic Python module.
86 partsCC-BY-4.0 - 2 layers99 × 99 mm

Current Limiter
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
68 parts3MIT - 2 layers140 × 70 mm

- 4 layers207 × 108 mm

Questions
How big is the Sjc PCB?
It measures 160 × 115 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Sjc use?
346 parts, built around the FAN7382N, 74LVC2T45DC, BSC0902NSI and NCP1117DT33. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sjc KiCad files?
From the tgiacomellibr/sjc repository on GitHub, at the commit this page was made from: the board is hardware/hardware.kicad_pcb and its schematic hardware/communication.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sjc design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).