
Heteromycin
hasenbanck/heteromycin
A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC

4 x V.24 (RS232) hat for RPi
RPi V24 is an open-source printed circuit board by tfritzon, from the tfritzon/RPi_V24 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 65 × 56 mm with 66 parts on 118 nets, routed with 668 tracks and 68 vias.
It is built around the MAX561CAI+ and CAT24C32LI-. Its parts include 18 connectors, 13 resistors, 12 diodes, 8 capacitors and 3 ICs.
4 x V.24 (RS232) hat for RPi
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 2K2 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R7, R9, R10, R12, R13, R14, R15 |
| 8 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 6 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J7, J10, J11, J14, J15 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | 10K, 10K, 10K, 10K |
| 4 | 3mm_Mounting_Hole | project_footprints:NPTH_3mm_ID | H1, H2, H3, H4 |
| 3 | BLU | LED_SMD:LED_0603_1608Metric | D4, D8, D12 |
| 3 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J5, J8, J13 |
| 3 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J16, J17, J18 |
| 3 | DB9_Male | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J1, J2, J4 |
| 3 | GRN | LED_SMD:LED_0603_1608Metric | D2, D6, D10 |
| 3 | RED | LED_SMD:LED_0603_1608Metric | D1, D5, D9 |
| 3 | YEL | LED_SMD:LED_0603_1608Metric | D3, D7, D11 |
| 2 | 3.9K | Resistor_SMD:R_0603_1608Metric_Pad0.84x1.00mm_HandSolder | 3K9, 3K9 |
| 2 | MAX561 | Package_SO:SSOP-28_3.9x9.9mm_P0.635mm | U1, U3 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.84x1.00mm_HandSolder | 10K |
| 1 | 40HAT | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | CAT24C32 | Package_SOIC:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | CONN_01X02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J12 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric_Pad0.84x1.00mm_HandSolder | R11 |
| 1 | LOGO | LOGO | G*** |

hasenbanck/heteromycin
A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC

MayaPosch/DebounceHat
Fully isolated, input debounce Hat for Raspberry Pi, for up to 6 switches, relays and powered devices

t9999clint/WavePi
Multifuntion synth platform for Raspberry Pi and other single board computers.





pilotniq/MJoulnir
Hardware and software for the control system of a full size electric boat.
It measures 65 × 56 mm and has 4 copper layers, 1.6 mm thick.
66 parts, built around the MAX561CAI+ and CAT24C32LI-. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tfritzon/RPi_V24 repository on GitHub, at the commit this page was made from: the board is RPi_V24/RPi_V24.kicad_pcb and its schematic RPi_V24/RPi_V24.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).