Skip to the content
2 layers15 × 33 mmBikeSensor, the printed circuit board in 3D

ケイデンスセンサーのPCBとファームウェア

Size
15 × 33 mm
Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
76
Pads
213
Tracks, vias
313, 38
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Aug 2026
Updated
6 Oct 2026

Overview

BikeSensor is an open-source printed circuit board by tettou771, from the tettou771/CadenceSensor repository on GitHub. It is a 2-layer board of 15 × 33 mm with 48 parts on 76 nets, routed with 313 tracks and 38 vias.

It is built around the MDBT50Q-1MV2, TPD4E02B04DQAR and KT-0603B, with the KT-0603R among its other parts. Its parts include 15 resistors, 10 capacitors, 7 ICs, 5 diodes and 1 connector. It belongs with the nRF52 and nRF5x boards of this library.

Main components

4

Parts

48
QtyValueFootprintReferences
6TestPointTestPoint:TestPoint_Pad_D1.5mmTP1, TP2, TP3, TP4, TP5, TP6
4100kResistor_SMD:R_0402_1005MetricR12, R13, R16, R17
310uFCapacitor_SMD:C_0603_1608MetricC10, C12, C20
2100nFCapacitor_SMD:C_0402_1005MetricC2, C7
210MResistor_SMD:R_0402_1005MetricR10, R11
212pFCapacitor_SMD:C_0402_1005MetricC3, C4
222RResistor_SMD:R_0402_1005MetricR2, R4
24.7uFCapacitor_SMD:C_0402_1005MetricC1, C5
25.1kResistor_SMD:R_0402_1005MetricR1, R3
2DDiode_SMD:D_SOD-323D2, D4
2~ThroughHole:TH_0.7mmH1, H2
11.5kResistor_SMD:R_0402_1005MetricR8
110kResistor_SMD:R_0402_1005MetricR14
110nFCapacitor_SMD:C_0402_1005MetricC11
12kResistor_SMD:R_0402_1005MetricR20
132.768KHzCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmX1
1330Resistor_SMD:R_0402_1005MetricR6
1330kResistor_SMD:R_0402_1005MetricR15
1BATtettou771_Library:SPK_PADU6
1KT-0603BLED_SMD:LED_0603_1608MetricD3
1KT-0603RLED_SMD:LED_0603_1608MetricD5
1LSM6DSV320XTRPackage_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU2
1MCP73831-2-MCPackage_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mmU7
1MDBT50Q-1MV2RF_Module:Raytac_MDBT50QU1
1SW_MEC_5GButton_Switch_SMD:SW_SPST_B3U-1000PSW2
1TPD4E02B04DQAPackage_SON:USON-10_2.5x1.0mm_P0.5mmU11
1TPS7A0233PDQNRPackage_SON:Texas_X2SON-4_1x1mm_P0.65mmU9
1USB_C_Receptacle_TYPE-C 16PIN 2MDtettou771_Library:USB_C_Receptacle_TYPE-C 16PIN 2MDJ1
1YELLOWLED_SMD:LED_0603_1608MetricD8
1~tettou771_Library:ICSP_SWD_127U5

Similar boards

  • 4 layers88.1 × 59.4 mmChromapi motherboard v1, the printed circuit board in 3D

    Chromapi motherboard v1

    Mowibox/chromapi_motherboard

    Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

    139 parts2Apache-2.0
  • 2 layers100 × 100 mmLiteWingV2.5C, the printed circuit board in 3D

    LiteWingV2.5C

    Omern187/lite-wing-drone

    This repository contains the current KiCad-based LiteWing prototype package: source PCB files, manufacturing outputs, assembly data, 3D reference models, firmware binaries, datasheets, and design-review records.

    87 parts
  • 4 layers60 × 50 mmESP32 boardV1, the printed circuit board in 3D

    ESP32 boardV1

    robertxdx/ESP32S3PD15W

    A 15 W USB-C powered ESP32-S3 LED-strip controller and development board.

    46 parts
  • 4 layers41.2 × 32.6 mmUsb2uart kicad, the printed circuit board in 3D

    Usb2uart kicad

    samvangysegem/usb2uart-hardware

    CH344-based USB-to-UART converter

    49 parts
  • 2 layers33.3 × 79.1 mmResonant tree, the printed circuit board in 3D

    Resonant tree

    Janky-Jingle-Crew/SouthPoleLevitator

    2025 Christmas card "South Pole Levitator"

    48 parts3
  • 4 layers50.8 × 22.9 mmBench stim wing, the printed circuit board in 3D

    Bench stim wing

    ThatguyCplus/throttleECU

    STM32F411CE Throttle ECU — PID position control with AS5048A encoder, H-bridge motor, safety module

    114 parts1
  • 4 layers40 × 40 mmMAVLink Lights, the printed circuit board in 3D

    MAVLink Lights

    DanielAdelodun/MAVLink-Lights-Hardware

    KiCAD files for MAVLink LED Strip Controller Hardware. Firmware can be found here: https://github.com/DanielAdelodun/MAVLinkLights

    81 parts
  • 2 layers18 × 22.5 mmESP32-C3-SuperMini, the printed circuit board in 3D

    ESP32-C3-SuperMini

    ded811/ESP32-C3-Super-Mini-Kicad

    An ESP32-C3 Super Mini Kicad Schematic

    39 parts3

Questions

How big is the BikeSensor PCB?

It measures 15 × 33 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BikeSensor use?

48 parts, built around the MDBT50Q-1MV2, TPD4E02B04DQAR, KT-0603B and KT-0603R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BikeSensor KiCad files?

From the tettou771/CadenceSensor repository on GitHub, at the commit this page was made from: the board is KiCad/BikeSensor/BikeSensor.kicad_pcb and its schematic KiCad/BikeSensor/BikeSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BikeSensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask tettou771 before reusing the design.