2 layers24.6 × 12 mm
2 layers119.9 × 23 mm
ESC Interface All
tetra-aero/ESC_Interface- Size
- 119.9 × 23 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 11
- Nets
- 71
- Pads
- 99
- Tracks, vias
- 61, 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Jun 2024
- Updated
- 17 Jul 2024
Overview
ESC Interface All is an open-source printed circuit board by tetra-aero, from the tetra-aero/ESC_Interface repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 119.9 × 23 mm with 11 parts on 71 nets, routed with 61 tracks and 2 vias.
It is built around the B2PS-VH, B4PS-VH and DE09P065HTXLF. Its parts include 9 connectors and 1 diode. It belongs with the robots and motor control and interfaces and adapters boards of this library.
Main components
3Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 4P_Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | B2PS-VH | Connector_JST:JST_VH_B2PS-VH_1x02_P3.96mm_Horizontal | J4 |
| 1 | B4PS-VH | Connector_JST:JST_VH_B4PS-VH_1x04_P3.96mm_Horizontal | J2 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_VH_B3PS-VH_1x03_P3.96mm_Horizontal | J1 |
| 1 | Conn_2Rows-09Pins | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Row | J5 |
| 1 | DA15 | Connector_Dsub:DSUB-15_Male_EdgeMount_P2.77mm_1 | P3 |
| 1 | DB25_Male | Connector_Dsub:DSUB-25_Male_EdgeMount_P2.77mm_1 | P1 |
| 1 | DSUB15 Male | Connector_Dsub:DSUB-15_Male_EdgeMount_P2.77mm_1 | P2 |
| 1 | DSUB9 Male | Connector_Dsub:DSUB-9_Male_Calendar_P2.77x2.84mm_MountingHoles3.1mm_24.99 | P4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
More from tetra-aero/ESC_Interface
7- 2 layers24.5 × 12 mm
- 2 layers41.7 × 12 mm
- 2 layers37.4 × 10 mm
- 2 layers28 × 12 mm
- 2 layers27.1 × 12 mm
- 2 layers16.1 × 10 mm
Similar boards
- 2 layers58 × 48 mm
- 2 layers104 × 57 mm
Generic pan tilt pcb
mitmedialab/generic-pan-tilt-pcb
Generic Pan Tilt PCB sources
91 partsCERN-OHL-P-2.0 - 8 layers320 × 380 mm
- 2 layers50 × 87 mm
StackChanPwd
lipoyang/StackChanPwd
M5Stack-embedded super cute humanoid controller unit
47 parts6Apache-2.0 - 4 layers124 × 62 mm
Carte puissance
INSA-GEI/gei-nxpcup-4w-pwr
Power part for 4 wheels model car used in NXPCUP contest at INSA-GEI
110 partsMIT - 2 layers
CANSAT PCB
RoctorpalSandilya/CANSAT-Ground-Control-System
A comprehensive Ground Control System (GCS) firmware and satellite electronics PCB design for a CubeSat developed by the Students Satellite Program Team of IIT Kharagpur, competing in the ISRO In-Space competition.
8 parts - 2 layers195 × 70 mm
- 4 layers29.2 × 71.9 mm
KRUPS FemtoSat
krups/RockSatX-GHOST-Hardware
Hardware files for the 2025 RockSat-X GHOST mission
38 parts
Questions
How big is the ESC Interface All PCB?
It measures 119.9 × 23 mm and has 2 copper layers, 1.2 mm thick.
What parts does the ESC Interface All use?
11 parts, built around the B2PS-VH, B4PS-VH and DE09P065HTXLF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESC Interface All KiCad files?
From the tetra-aero/ESC_Interface repository on GitHub, at the commit this page was made from: the board is ESC_Interface/ESC_Interface_All/ESC_Interface_All.kicad_pcb and its schematic ESC_Interface/ESC_Interface_All/ESC_Interface_All.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESC Interface All design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).