
Workshop 1
Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces
Workshop 6 is an open-source printed circuit board by Tessavana, from the Tessavana/Soft-interfaces-files repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 100 × 18.7 mm with 624 parts on 16 nets, routed with 8 tracks and 0 vias.
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces https://softinterfaces.com/EOP.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 622 | 200V | TP_Library:TP 0.15mm | TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V** +606 |
| 1 | Conn_01x16_Pin | TP_Library:TEST FPC_1 | J3 |
The 623 most common of 624 parts.

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces


Cosys-Lab/TruggySense
Framework for off-road rc-vehicle monitorring

DeadBugEngineering/DinRailPrototyping
A collection of information and designs to accelerate the creation of custom electronics that fit into a DIN rail chassis

algnor/qc3-bc
Battery controller using a bit bang implementation of QC3.0 protocol with accommodating hardware


alxhoff/RGB-Mechanical-Keyboard
Mechanical keyboard with various configurations and "in-PCB" WS2812 RGB LEDs


It measures 100 × 18.7 mm and has 2 copper layers, 0.29 mm thick.
624 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tessavana/Soft-interfaces-files repository on GitHub, at the commit this page was made from: the board is Electronics/Electrodes/Workshop 6.kicad_pcb and its schematic Electronics/Electrodes/Workshop 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).