
Workshop 1
Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces
Workshop 4 is an open-source printed circuit board by Tessavana, from the Tessavana/Soft-interfaces-files repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 100 × 18.7 mm with 3,065 parts on 16 nets, routed with 95 tracks and 0 vias.
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces https://softinterfaces.com/EOP.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3063 | 200V | TP_Library:TP 0.15mm | TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V** +3047 |
| 1 | Conn_01x16_Pin | TP_Library:TEST FPC_1 | J3 |
The 3,064 most common of 3,065 parts.

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

pris-digital/ManhattanBreakoutBoards-Panelized
A collection of breakout boards for manhattan style prototyping

SolderedElectronics/ADC-12-bit-ADS1015-4-channel-with-PGA-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for ADC-12-bit-ADS1015-4-channel-with-PGA-breakout designed by Soldered Electronics.

SolderedElectronics/qwiic-hub-hardware-design
Hardware design, BOM, gerbers and 3D files for qwiic-hub designed by Soldered Electronics.

idlehandsdev/black_rabbit
A low poly LED mask made completely out of circuit boards. Second version of a series of high tech face changing masks.

SolderedElectronics/Accelerometer---Gyroscope---Magnetometer-LSM9DS1TR-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Accelerometer-&-Gyroscope-&-Magnetometer-LSM9DS1TR-breakout designed by Soldered Electronics.

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products


FrankBuss/mesh
This project implements a 30x30 node resistor mesh for testing it approximately. The mesh contains 1,740 resistors (870 horizontal + 870 vertical connections), each a 1kΩ 0805 SMD resistor with 0.1% precision.
It measures 100 × 18.7 mm and has 2 copper layers, 0.29 mm thick.
3,065 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tessavana/Soft-interfaces-files repository on GitHub, at the commit this page was made from: the board is Electronics/Electrodes/Workshop 4.kicad_pcb and its schematic Electronics/Electrodes/Workshop 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).