
Workshop 1
Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces
Flex sensor PCB is an open-source printed circuit board by Tessavana, from the Tessavana/Soft-interfaces-files repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 92 × 40 mm with 5 parts on 4 nets, routed with 18 tracks and 0 vias.
It belongs with the sensors and measurement boards of this library.
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces https://softinterfaces.com/EOP.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | , | ||
| 1 | Conn_01x04_Pin | FPC:FPC_Conn_4 | J1 |
The 3 most common of 5 parts.

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces


joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
It measures 92 × 40 mm and has 2 copper layers, 0.29 mm thick.
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tessavana/Soft-interfaces-files repository on GitHub, at the commit this page was made from: the board is Electronics/Electrodes/flex sensor PCB.kicad_pcb and its schematic Electronics/Electrodes/Workshop 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).