
Workshop 1
Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces
First PCB is an open-source printed circuit board by Tessavana, from the Tessavana/Soft-interfaces-files repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 50 × 40 mm with 269 parts on 4 nets, routed with 19 tracks and 0 vias.
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces https://softinterfaces.com/EOP.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 256 | TestPoint | TP_Library:TP | TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10 +240 |
| 8 | , , , , , , , | ||
| 1 | Conn_01x05_Pin | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
The 265 most common of 269 parts.

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

schlae/HardDriveInfo
Repair info and schematics for mostly older MFM hard drives

HologramEducation/beaglephone-pocket
A cellular add-on board for the BeaglePocket



bernardopg/ps28-modern-amp
Infinity Primus PS28 amplifier modernization: TPA3255 engineering, validation and safety-gated workflow


gschuurman/android_vendor_gschuurman_vehicle_interfaces
vehicle interfaces for android automotive for a custom headunit
It measures 50 × 40 mm and has 4 copper layers, 0.8 mm thick.
269 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tessavana/Soft-interfaces-files repository on GitHub, at the commit this page was made from: the board is Electronics/Electrodes/first PCB.kicad_pcb and its schematic Electronics/Electrodes/Workshop 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).