

UMA
KiCAD data
- Size
- 95.6 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 26
- Pads
- 125
- Tracks, vias
- 154, 32
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
UMA is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 2-layer board of 95.6 × 50 mm with 36 parts on 26 nets, routed with 154 tracks and 32 vias.
It is built around the ESP32-C3-WROOM-02-H4, RT9080N-08GJ5 and WS2812B. Its parts include 7 connectors, 5 capacitors, 3 resistors, 2 ICs and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
3ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesRT9080N-08GJ5
TSOT-23-5-40℃~+85℃@(Ta) 1 1.33V@(600mA) 26uVrms 2uA 5.5V 600mA 75dB@(1kHz) 800mV~3.3V、800mV Adjustable、Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 4 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2, J4, J6, J7 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | SW_MEC_5E | Yamaha:SW_SKRPABE010 | SW1, SW2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J5 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J8 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | RT9080N-08GJ5 | footprints:SOT94P280X100-5N | IC1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
The 24 most common of 36 parts.
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

Similar boards
- 2 layers60 × 30 mm

- 4 layers105 × 60 mm

Picocart64 v2
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
162 parts26 - 2 layers60 × 100 mm

- 2 layers20 × 24 mm

Desk display
oltdaniel/PCB_deskDisplay
a small esp32-c3 PCB for an I²C display, NeoPixel and Button for smart home stuff.
16 parts3 - 2 layers60 × 100 mm

MCC25-Badge
ssi51/MCC25-Badge
Official repository for the MCC 25' Badge. An open-source, ESP32-C3 powered badge featuring WiFi, BLE and a retro-gaming interface.
47 parts3 - 2 layers183.2 × 65.1 mm

- 4 layers50 × 50 mm

- 2 layers90 × 65 mm

Questions
How big is the UMA PCB?
It measures 95.6 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UMA use?
36 parts, built around the ESP32-C3-WROOM-02-H4, RT9080N-08GJ5 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UMA KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is UMA/UMA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UMA design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.