

MCC25-Badge
Official repository for the MCC 25' Badge. An open-source, ESP32-C3 powered badge featuring WiFi, BLE and a retro-gaming interface.
- Size
- 60 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 29
- Pads
- 145
- Tracks, vias
- 252, 30
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Nov 2025
- Updated
- 30 Nov 2025
Overview
MCC25-Badge is an open-source printed circuit board by ssi51, from the ssi51/MCC25-Badge repository on GitHub. It is a 2-layer board of 60 × 100 mm with 47 parts on 29 nets, routed with 252 tracks and 30 vias.
It is built around the ESP32-C3-WROOM-02-H4, AMS1117-3.3 and WS2812B. Its parts include 10 resistors, 7 switches, 6 capacitors, 6 diodes and 3 connectors. It belongs with the radio and wireless and lEDs and displays boards and the ESP32 and RISC-V boards of this library.
Main components
3ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
hardware/README.md🛠️ MCC25 Badge Hardware Design
This directory contains the Open Source Hardware (OSHW) design files for the MCC25 Badge. The PCB was designed using KiCad (Version 7.0+).
📂 File Descriptions
| File Name | Description |
|---|---|
mcc25_badge.kicad_pro | Main KiCad Project file. Open this to start editing. |
mcc25_badge.kicad_sch | Schematic: Shows how the ESP32-C3 connects to the OLED, LEDs, and buttons. |
mcc25_badge.kicad_pcb | PCB Layout: The physical board routing, layers, and footprints. |
gerber.zip | Production Files: The exact manufacturing files needed to order this board from a fab house. |
📐 Technical Specifications
- Layers: 2-Layer PCB
- Dimensions: 100mm x 60mm
- Thickness: 1.6mm (Standard)
- Signal Voltage: 3.3V Logic
🏭 How to Order This Board (Fabrication)
You don't need to install KiCad if you just want to manufacture the PCB.
- Download the Gerbers: Download the file
gerber.zipfrom this folder. - Visit a Manufacturer: Go to a PCB fabrication website (e.g., JLCPCB, PCBWay, AiPCBA).
- Upload: Drag and drop the
gerber.zipfile into their "Quote" tool. - Select Settings: The defaults are usually fine, but ensure the following:
- Layers: 2
- Thickness: 1.6mm
- PCB Color: Black (Matches the MCC aesthetic)
- Surface Finish: HASL (Cheaper) or ENIG (Better for gold pads)
- Order: Add to cart and ship!
✏️ How to Modify the Design
If you want to change the logo, move buttons, or add sensors:
- Install KiCad (Free & Open Source) from kicad.org.
- Clone this repository to your computer.
- Double-click
mcc25_badge.kicad_proto open the project manager. - Open the Schematic Editor to change connections or the PCB Editor to change the physical layout.
⚠️ Assembly Note
This board uses SMD (Surface Mount Device) components for the ESP32-C3 and LEDs.
- If ordering PCB Assembly (PCBA) services, you will need to provide them with the
BOM(Bill of Materials) andCPL(Component Placement List). - If assembling by hand, ensure you have a hot air station or a fine-tip soldering iron.
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R11 |
| 6 | LOGO | IMG:bat | G***, G***, G***, G***, G***, G*** |
| 5 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2, SW3, SW4, SW5, SW6 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C5 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Battery | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:Nexperia_CFP3_SOD-123W | D9 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | LOGO | mcc:conquer_grey | G*** |
| 1 | LOGO | mcc:rehack | G*** |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW8 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J2 |
Similar boards
- 2 layers60 × 30 mm

- 2 layers60 × 100 mm

- 2 layers20 × 24 mm

Desk display
oltdaniel/PCB_deskDisplay
a small esp32-c3 PCB for an I²C display, NeoPixel and Button for smart home stuff.
16 parts3 - 2 layers183.2 × 65.1 mm

- 4 layers105 × 60 mm

Picocart64 v2
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
162 parts26 - 4 layers50 × 50 mm

- 2 layers90 × 65 mm

- 2 layers71 × 150.5 mm

Signal detector
joshitha-c/rf_detector
A portable, custom-built RF signal scanner and power detector designed for knowing wireless signals, measuring signal strength and can be used to be safe.
57 parts
Questions
How big is the MCC25-Badge PCB?
It measures 60 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MCC25-Badge use?
47 parts, built around the ESP32-C3-WROOM-02-H4, AMS1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCC25-Badge KiCad files?
From the ssi51/MCC25-Badge repository on GitHub, at the commit this page was made from: the board is hardware/mcc25_badge.kicad_pcb and its schematic hardware/mcc25_badge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCC25-Badge design in my own project?
Its repository states no licence, so its author keeps all rights: ask ssi51 before reusing the design.