

Mtdrv
KiCAD data
- Size
- 12 × 20.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 14
- Pads
- 63
- Tracks, vias
- 114, 24
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
Mtdrv is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 2-layer board of 12 × 20.5 mm with 20 parts on 14 nets, routed with 114 tracks and 24 vias.
It is built around the ATTINY402-SSN, TLV9001IDCK and BD6222HFP-TR, with the RT9080N-08GJ5 among its other parts. Its parts include 6 capacitors, 6 resistors, 5 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATTINY402-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 256Byte 4KB 6 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TLV9001IDCK
SC-70-5-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 1 1.6mV 1.8V~5.5V 1MHz 2V/us 2pA 4.7nV/√Hz@1kHz 40mA 5pA 600nV/℃ 60uA 86dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierBD6222HFP-TR
TO-263-8-40℃~+85℃ 0uA 2 2V 6V~15V 800mV Full-Bridge MOSFET Over Voltage Protection、Over Current Protection、Overtemperature protection (OTP) TO-263-8 Brushed DC Motor Drivers ROHSROHM SemiconductorGate DriversRT9080N-08GJ5
TSOT-23-5-40℃~+85℃@(Ta) 1 1.33V@(600mA) 26uVrms 2uA 5.5V 600mA 75dB@(1kHz) 800mV~3.3V、800mV Adjustable、Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0u1 | Yamaha:1005 | C1, C3, C4 |
| 3 | 10k | Yamaha:R1005 | R1, R2, R4 |
| 2 | 4k7 | Yamaha:R1005 | R3, R5 |
| 1 | 100u/16V | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W | C2 |
| 1 | 10u | Yamaha:C1608 | C5 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 6k2 | Yamaha:R1005 | R6 |
| 1 | ATtiny402-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | BD6222HFP-TR | Yamaha:BD6222HFPTR | IC1 |
| 1 | Conn_01x02_Pin | Yamaha:smd_1.27mm_01x02 | J1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | RT9080N-08GJ5 | Yamaha:SOT94P280X100-5N | IC2 |
| 1 | TLV9001IDCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U2 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U3 |
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

Similar boards
- 2 layers107.9 × 82.6 mm

- 2 layers94 × 70 mm

- 2 layers95.9 × 90.2 mm

- 4 layers110 × 64 mm

SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge
The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
145 parts39 - 4 layers101.5 × 44.8 mm

- 4 layers94.3 × 81.8 mm

YukaLink revA
Misaka0x2730/YukaLink
Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.
321 parts3GPL-3.0 - 4 layers85 × 56 mm

- 2 layers46.7 × 20.3 mm

Questions
How big is the Mtdrv PCB?
It measures 12 × 20.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mtdrv use?
20 parts, built around the ATTINY402-SSN, TLV9001IDCK, BD6222HFP-TR and RT9080N-08GJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mtdrv KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is mtdrv/mtdrv.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mtdrv design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.