

ESP32
KiCAD data
- Size
- 83.3 × 75.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 176
- Nets
- 29
- Pads
- 840
- Tracks, vias
- 1,360, 568
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
ESP32 is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 2-layer board of 83.3 × 75.6 mm with 176 parts on 29 nets, routed with 1,360 tracks and 568 vias.
It is built around the ESP32-C3-WROOM-02-H4, RT9080N-08GJ5 and BSS138. Its parts include 40 capacitors, 40 resistors, 32 ICs, 24 connectors and 16 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
3ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesRT9080N-08GJ5
TSOT-23-5-40℃~+85℃@(Ta) 1 1.33V@(600mA) 26uVrms 2uA 5.5V 600mA 75dB@(1kHz) 800mV~3.3V、800mV Adjustable、Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
176| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C2, C2, C2, C2, C2, C2, C2, C2, C4, C4, C4, C4, C4, C4, C4, C4 +8 |
| 16 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R4, R4, R4, R4, R4, R4, R4, R5, R5, R5, R5, R5, R5, R5, R5 |
| 16 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R2, R2 |
| 16 | C_Small | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C1, C1, C1, C1, C3, C3, C3, C3, C3, C3, C3, C3 |
| 16 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2, J2, J2, J2, J2, J2, J2, J2, J3, J3, J3, J3, J3, J3, J3, J3 |
| 16 | LED_Small | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D1, D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D2, D2 |
| 16 | SW_MEC_5E | Yamaha:SKRPABE010 | SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW2, SW2, SW2, SW2, SW2, SW2, SW2, SW2 |
| 16 | ~ | Package_TO_SOT_SMD:SOT-23-3 | U2, U2, U2, U2, U2, U2, U2, U2, U3, U3, U3, U3, U3, U3, U3, U3 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R3, R3, R3, R3, R3, R3, R3 |
| 8 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1 |
| 8 | ESP32-C3-WROOM-02 | Yamaha:ESP32-C3-WROOM-02 | U1, U1, U1, U1, U1, U1, U1, U1 |
| 8 | RT9080N-08GJ5 | Yamaha:SOT94P280X100-5N | IC1, IC1, IC1, IC1, IC1, IC1, IC1, IC1 |
| 8 | USB_C_Receptacle_USB2.0_16P | Yamaha:USB_C_Receptacle_GCT_USB4110 | J1, J1, J1, J1, J1, J1, J1, J1 |
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

- 2 layers42.5 × 51 mm

Similar boards
- 2 layers224 × 70 mm

Nixie clock
danpham/nixie_clock
ESP32-C3 Nixie clock using IN14/IN3 tubes and HV5622 driver.
98 parts1LGPL-3.0 - 2 layers50.8 × 76.2 mm

StreetcarGTFSMap
rgw3d/CincyStreetcarTracker
I learned that the real-time transit information for the Cincinnati Streetcar was published by Metro here: https://www.go-metro.com/about/developer-data/ in GTFS form.
52 parts1GPL-3.0 - 2 layers88.9 × 61.6 mm

- 4 layers40 × 55 mm

IoT Board V1.0
anukul1392001/IoT_Board_V1.0
IoT Board for Data Acquisition and Actuation Control.
119 partsGPL-3.0 - 4 layers35.5 × 74.5 mm

Room environment monitor
kevinlutzer/room-environment-monitor
An IOT device built of the raspberry pi
57 parts - 2 layers47 × 38.7 mm

- 2 layers235 × 235 mm

ESP Wordclock
nikolai2111/Multilayout-ESP-Wordclock_HW
Hardware (PCB) for an ESP32-C3 based word clock with support of different layouts and languages.
308 partsCERN-OHL-P-2.0 - 2 layers74 × 83.8 mm

PCB Board
RunningJoke/reactionButton
ReactPod: ESP32-C3 reaction buzzers – firmware, Config App (PWA), tools, hardware
70 parts
Questions
How big is the ESP32 PCB?
It measures 83.3 × 75.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 use?
176 parts, built around the ESP32-C3-WROOM-02-H4, RT9080N-08GJ5 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is ESP32/ESP32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.