

Ammeter2
KiCAD data
- Size
- 25 × 15 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 45
- Nets
- 59
- Pads
- 204
- Tracks, vias
- 249, 81
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
Ammeter2 is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 4-layer board of 25 × 15 mm with 45 parts on 59 nets, routed with 249 tracks and 81 vias.
It is built around the ATTINY1604-SSF, CH340E and TLV9001IDCK, with the AP63203WU, TC7W74FU,LF and THAF01-NC-R among its other parts. Its parts include 15 capacitors, 13 resistors, 10 ICs, 2 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATTINY1604-SSF
SOIC-14-40℃~+125℃ 10bit 12 16KB 16MHz 1KB 2.7V~5.5V 256Byte 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersTLV9001IDCK
SC-70-5-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 1 1.6mV 1.8V~5.5V 1MHz 2V/us 2pA 4.7nV/√Hz@1kHz 40mA 5pA 600nV/℃ 60uA 86dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierAP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersTC7W74FU,LF
SSOP-8-3mm-40℃~+85℃ 0ns 15ns 26ns@6V,50pF 2V~6V 2uA 5.2mA 5.2mA 5pF 67MHz D-Type Rising Edge Set and Reset TC7W Series SSOP-8-3mm Flip Flops ROHSToshibaFlip FlopsTHAF01-NC-R
SMD-4P,3.5x3mm-40℃~+85℃ 1.2mm 100,000 cycles 12V 2.5N 2.9mm 3.5mm 50mA No Rectangular Button SMD(SMT) Tab Surface Mount,Vertical Without Bracket SMD-4P,3.5x3mm Tactile Switches ROHSjianfuTactile Switches
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Yamaha:1005 | C1, C4, C6, C8, C15, C16 |
| 4 | 10k | Yamaha:R1005 | R3, R4, R6, R11 |
| 4 | 4.7k | Yamaha:R1005 | R7, R8, R9, R12 |
| 3 | 1u | Yamaha:1005 | C10, C11, C12 |
| 2 | 1k | Yamaha:R1005 | R10, R14 |
| 2 | 22u | Yamaha:C1608 | C7, C9 |
| 2 | 4.7u | Yamaha:1005 | C13, C14 |
| 1 | 100 | Yamaha:R1005 | R2 |
| 1 | 100k | Yamaha:R1005 | R5 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 1n | Yamaha:1005 | C3 |
| 1 | 4.7u | Yamaha:C2520 | L1 |
| 1 | 470m | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 8m | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U5 |
| 1 | ATtiny1604-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U8 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U7 |
| 1 | INA181 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | MCP1501-12xCH | Package_TO_SOT_SMD:SOT-23-6 | U10 |
| 1 | SW_MEC_5E | Yamaha:THAF01NCR | SW1 |
| 1 | TC7W74FU | Yamaha:TC7W53FUF | IC1 |
| 1 | THAF01-NC-R | Yamaha:THAF01NCR | S1 |
| 1 | TLV9001IDCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U2 |
| 1 | USB_C_Plug | Yamaha:USB_C_3.0_PLUG | P1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J1 |
| 1 | blue | Yamaha:D1005 | D1 |
| 1 | ~ | Yamaha:FUSB42UMX | U4 |
| 1 | ~ | Yamaha:SSAJ120100 | U9 |
| 1 | ~ | Yamaha:X032-6032TSWAG02-H14 F | U6 |
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

Similar boards
- 2 layers65.7 × 51 mm

(KiCad)DriveUnit B series(ver2.0)
issaimaru/MoterDriver_v1
80A級モータードライバ 制作期間:2022/01/18頃~ 名前:DriveUnit Bseries
67 parts5Apache-2.0 - 2 layers65.7 × 23.3 mm

- 2 layers48 × 73 mm

- 4 layers110 × 64 mm

SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge
The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
145 parts39 - 4 layers101.5 × 44.8 mm

- 4 layers94.3 × 81.8 mm

YukaLink revA
Misaka0x2730/YukaLink
Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.
321 parts3GPL-3.0 - 4 layers85 × 56 mm

- 2 layers46.7 × 20.3 mm

Questions
How big is the Ammeter2 PCB?
It measures 25 × 15 mm and has 4 copper layers, 0.8 mm thick.
What parts does the Ammeter2 use?
45 parts, built around the ATTINY1604-SSF, CH340E, TLV9001IDCK and AP63203WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ammeter2 KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is ammeter2/ammeter2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ammeter2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.