

Ammeter
KiCAD data
- Size
- 25 × 14.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 52
- Pads
- 179
- Tracks, vias
- 215, 51
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
Ammeter is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 4-layer board of 25 × 14.5 mm with 35 parts on 52 nets, routed with 215 tracks and 51 vias.
It is built around the ATTINY1604-SSF, CH340E and TMUXHS221NKGT. Its parts include 13 resistors, 11 capacitors, 6 ICs, 3 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY1604-SSF
SOIC-14-40℃~+125℃ 10bit 12 16KB 16MHz 1KB 2.7V~5.5V 256Byte 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersTMUXHS221NKGT
UQFN-10(1.4x1.8)-40℃~+125℃ 1.7pF 16us 2:1 3.3GHz 3V~3.6V 500ns 80ps 8Ω UQFN-10(1.4x1.8) Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 4.7k | Yamaha:R1005 | R13, R14, R15, R16, R19, R20, R21 |
| 4 | 0.1u | Yamaha:1005 | C2, C3, C4, C5 |
| 4 | 10k | Yamaha:R1005 | R3, R11, R12, R18 |
| 4 | 1u | Yamaha:1005 | C6, C7, C8, C11 |
| 3 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J1, J2, J3 |
| 2 | 4.7u | Yamaha:1005 | C9, C10 |
| 2 | SW_MEC_5E | Yamaha:SKRPABE010 | SW1, SW2 |
| 1 | 100k | Yamaha:R1005 | R17 |
| 1 | 10u | Yamaha:1005 | C12 |
| 1 | 8m | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | AP7375-33SA-7 | Yamaha:SOT96P240X110-3N | IC1 |
| 1 | ATtiny1604-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | INA181 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | TMUXHS221NKGT | Yamaha:TMUXHS221NKGT | IC2 |
| 1 | ~ | Yamaha:X032-6032TSWAG02-H14 F | U4 |
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

Similar boards
- 2 layers48 × 73 mm

- 2 layers58 × 58 mm

- 2 layers60 × 100 mm

- 2 layers19.8 × 17.8 mm

- 4 layers40 × 27 mm

- 2 layers50 × 40.9 mm

GR ATTiny LFO
GadgetReboot/ATTiny_LFO
Dual low frequency oscillators using ATTiny and MCP4725 DACs
36 parts3 - 2 layers77.2 × 50.3 mm

- 2 layers58.3 × 98.6 mm

Questions
How big is the Ammeter PCB?
It measures 25 × 14.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ammeter use?
35 parts, built around the ATTINY1604-SSF, CH340E and TMUXHS221NKGT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ammeter KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is ammeter/_restore_backup_2026-05-09T13-36-58-014/ammeter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ammeter design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.