4 layers36 × 50.2 mm
Racer
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
83 parts3.8kApache-2.0
4 layers202.6 × 150.8 mm
Ataro v0.2
temataro/keebs-rsSoldered with Epomaker Budgerigar switches, and LL4148 MELF diodes. Using a cheap Arduino Pro Micro clone from aliexpress as the microcontroller.
- Size
- 202.6 × 150.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 59
- Pads
- 446
- Tracks, vias
- 787, 40
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Aug 2024
- Updated
- 2 Feb 2025
Overview
Ataro v0.2 is an open-source printed circuit board by temataro, from the temataro/keebs-rs repository on GitHub. It is a 4-layer board of 202.6 × 150.8 mm with 83 parts on 59 nets, routed with 787 tracks and 40 vias.
Its parts include 35 diodes, 35 switches, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
ataro_v0.2/README.mdKicad 3D view
Assembled board:
Soldered with Epomaker Budgerigar switches, and LL4148 MELF diodes. Using a cheap Arduino Pro Micro clone from aliexpress as the microcontroller.
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | D | ScottoKeebs_Components:Diode_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +19 |
| 6 | HOLE | Lily58-footprint:HOLE_M2_TH | TH3, TH4, TH4, TH5, TH6, TH7 |
| 2 | R_DIN0204_P2.54mm | PCM_Resistor_THT_US_AKL:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | Rrx1, Rtx1 |
| 1 | 1 | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW3 |
| 1 | 2 | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW4 |
| 1 | 3 | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW5 |
| 1 | 4 | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW6 |
| 1 | 4PIN | ScottoKeebs_Components:TRRS_PJ-320A | J1 |
| 1 | 5 | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW7 |
| 1 | A | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW16 |
| 1 | ALT | ScottoKeebs_MX:MX_PCB_1.25u | SW33 |
| 1 | B | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW27 |
| 1 | BACKSPACE | ScottoKeebs_MX:MX_PCB_2.00u | SW35 |
| 1 | C | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW25 |
| 1 | CAPSLOCK | ScottoKeebs_MX:MX_PCB_1.75u | SW15 |
| 1 | CTRL | ScottoKeebs_MX:MX_PCB_1.25u | SW29 |
| 1 | D | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW18 |
| 1 | E | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW11 |
| 1 | ESC | ScottoKeebs_MX:MX_PCB_1.25u | SW1 |
| 1 | Encoder_Rotary_11mm_SPST_DShaft | PCM_4ms_Encoder:ENC_SPST_12mm | ENC1 |
| 1 | F | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW19 |
| 1 | G | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW20 |
| 1 | HOLE | Lily58-footprint:HOLE_M2 | TH2 |
| 1 | ProMicro | ScottoKeebs_MCU:Arduino_Pro_Micro | U1 |
| 1 | Q | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW9 |
| 1 | R | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW12 |
| 1 | S | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW17 |
| 1 | SHIFT | ScottoKeebs_MX:MX_PCB_1.75u | SW22 |
| 1 | SPACE | ScottoKeebs_MX:MX_PCB_2.00u | SW34 |
| 1 | SUPER | ScottoKeebs_MX:MX_PCB_1.25u | SW32 |
| 1 | SW_RST | PCM_4ms_Experimental_FP:SW_PUSH_6mm_H13mm | RSW1 |
| 1 | T | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW13 |
| 1 | TAB | ScottoKeebs_MX:MX_PCB_1.50u | SW8 |
| 1 | TILDE | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW2 |
| 1 | V | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW26 |
| 1 | W | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW10 |
| 1 | X | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW24 |
| 1 | Y | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW14 |
| 1 | Z | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW23 |
| 1 | ^ | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW30 |
| 1 | v | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW31 |
| 1 | { | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW21 |
| 1 | } | ScottoKeebs_MX:MX_PCB_1.00u_Reversable | SW28 |
Questions
How big is the Ataro v0.2 PCB?
It measures 202.6 × 150.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ataro v0.2 use?
83 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ataro v0.2 KiCad files?
From the temataro/keebs-rs repository on GitHub, at the commit this page was made from: the board is ataro_v0.2/ataro_v0.2.kicad_pcb and its schematic ataro_v0.2/ataro_v0.2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ataro v0.2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask temataro before reusing the design.
Similar boards
- 4 layers30 × 30 mm
ReCamera 2002 S4 GC2053 Sensor Board V1.0 SCH&PCB 250905
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
83 parts495Apache-2.0 - 4 layers95 × 56 mm
- 4 layers32 × 30 mm
- 4 layers44 × 39 mm
Ad9864 breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
83 parts205 - 4 layers60 × 28 mm
- 4 layers43.4 × 25.4 mm
R820t2 breakout
emeb/r820t2
Breakout PCB design and STM32F0 firmware for the Rafael R820T2 tuner chip
83 parts85 - 4 layers40 × 40 mm
CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT