6 layers50 × 50 mm
4 layers50 × 50 mm
IRISV2 GPS
teletype7/IRIS-v21a complete redesign of my flight computer, IRIS
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 24
- Pads
- 101
- Tracks, vias
- 83, 1,663
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Apr 2026
- Updated
- 27 Jul 2026
Overview
IRISV2 GPS is an open-source printed circuit board by teletype7, from the teletype7/IRIS-v2 repository on GitHub. It is a 4-layer board of 50 × 50 mm with 30 parts on 24 nets, routed with 83 tracks and 1,663 vias.
It is built around the NEO-M9N-00B, AANI-PP-0055 and AFII-SW-0061-T. Its parts include 11 capacitors, 2 resistors, 2 ICs, 1 diode and 1 connector. It belongs with the radio and wireless boards of this library.
Main components
3
NEO-M9N-00B
SMD-24P-167dBm -40℃~+85℃ 2.7V~3.6V 24s 2m 36mA@3.0V GPS、BDS、QZSS、Galileo、GLONASS RTC backup power UART、I2C、USB、SPI、JTAG SMD-24P GNSS Modules ROHSu-bloxGNSS ModulesAANI-PP-0055
-- Lack of specifications ROHSAbraconUncategorisedAFII-SW-0061-T
SMD-5P,1.4x1.1mmSMD-5P,1.4x1.1mm SAW Filters ROHSAbraconSAW Filters
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 22uF | Capacitor_SMD:C_1210_3225Metric | C1, C2 |
| 2 | dnp | Capacitor_SMD:C_0201_0603Metric | C10, C11 |
| 1 | 9.1nH | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | AANI-PP-0055 | AANI-PP-0055:AANI-PP-0055 | AE1 |
| 1 | AFII-SW-0061-T | AFII-SW-0061-T:AFIISW0061T | FL1 |
| 1 | Conn_01x06_MountingPin | Connector_JST:JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal | J1 |
| 1 | D_TVS | Diode_SMD:D_0201_0603Metric | D1 |
| 1 | GPS_BOOT | TestPoint:TestPoint_Pad_D1.5mm | BOOT |
| 1 | GPS_D+ | TestPoint:TestPoint_Pad_D1.5mm | D+ |
| 1 | GPS_D- | TestPoint:TestPoint_Pad_D1.5mm | D- |
| 1 | GPS_SCL | TestPoint:TestPoint_Pad_D1.5mm | SCL |
| 1 | GPS_SDA | TestPoint:TestPoint_Pad_D1.5mm | SDA |
| 1 | NC | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | DSEL |
| 1 | NEO-M9N | RF_GPS:ublox_NEO | U1 |
| 1 | lna | ALND-WB-0013-T:ALND-WB-0013-T | U2 |
More from teletype7/IRIS-v2
2- 4 layers50 × 50 mm
Similar boards
- 4 layers194.3 × 92.8 mm
- 2 layers50.8 × 22.9 mm
Feather NEO M9N GPS
averywallis/Feather-NEO-M9N-GPS
KiCad files for a NEO-M9N GPS Featherwing
61 parts6GPL-3.0 - 4 layers60.7 × 61.3 mm
Power Unit
Project-SkyFall/CanSat-2023
This is repository for Czech CanSat team Project SkyFall
162 parts6 - 4 layers72 × 78.5 mm
DashSight Mezzanine Card
DashSight/Pine64-Mezzanine-Card
A PineA64 mezzanine card for adding support to communicate with a vehicle's OBD2 port, obtain GPS location and determine acceleration, designed in KiCAD
88 parts3 - 4 layers61 × 79 mm
RP2350 80QFN minimal
Sphyrna-029/Pico-Pilot
A simple auto pilot for land/water based robots based on the Raspberry Pi rp2350B/2354B
75 parts3 - 4 layers42 × 65 mm
Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT - 6 layers90 × 90 mm
Cansat
DevKiDCosmo/SATELLITE-EDGE-MODULE
A satellite edge module ready for competition
220 parts2GPL-3.0 - 2 layers30 × 85.5 mm
Main Deck Longitudinal v0.1
dgtaheno/RocketOS
ESP32 flight computer with MAVLink telemetry, QGroundControl integration, GPS, BMP388 altimetry, INA219 power monitoring and fault-tolerant SD logging
11 parts2MIT
Questions
How big is the IRISV2 GPS PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the IRISV2 GPS use?
30 parts, built around the NEO-M9N-00B, AANI-PP-0055 and AFII-SW-0061-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IRISV2 GPS KiCad files?
From the teletype7/IRIS-v2 repository on GitHub, at the commit this page was made from: the board is pcb/IRISV2_GPS/IRISV2_GPS.kicad_pcb and its schematic pcb/IRISV2_BOTTOM/IRISV2_BOTTOM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IRISV2 GPS design in my own project?
Its repository states no licence, so its author keeps all rights: ask teletype7 before reusing the design.