
Panel
Telekomak/FiresportTimer
An open source firesport timer designed for "fire attack" discipline

An open source firesport timer designed for "fire attack" discipline
FT Hall is an open-source printed circuit board by Telekomak, from the Telekomak/FiresportTimer repository on GitHub. It is a 2-layer board of 8 × 17 mm with 5 parts on 4 nets, routed with 14 tracks and 0 vias.
It is built around the TLV4906K. Its parts include 2 capacitors, 1 resistor, 1 transistor and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7nF, 25V | Capacitor_SMD:C_0603_1608Metric | C101, C102 |
| 1 | 200R | Resistor_SMD:R_0603_1608Metric | R101 |
| 1 | Conn_01x03_Pin | SMD_3_PADS:3_SMD_PADS | CON101 |
| 1 | TLV4906K | Package_TO_SOT_SMD:SOT-23 | Q101 |

Telekomak/FiresportTimer
An open source firesport timer designed for "fire attack" discipline

Telekomak/FiresportTimer
An open source firesport timer designed for "fire attack" discipline

Telekomak/FiresportTimer
An open source firesport timer designed for "fire attack" discipline

Telekomak/FiresportTimer
An open source firesport timer designed for "fire attack" discipline



joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 8 × 17 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the TLV4906K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Telekomak/FiresportTimer repository on GitHub, at the commit this page was made from: the board is PCB/FT_Hall/FT_Hall.kicad_pcb and its schematic PCB/FT_Hall/FT_Hall.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Telekomak before reusing the design.