
LSR FLCM0001 A03
Louisiana-State-Rocketry/FLCM0001-A03_PCB
PCB Files for the Eclipse 2 Flight Computer.

Magnetic Switch is an open-source printed circuit board by US-air-force999, from the US-air-force999/Magnetic-Switch repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 9 × 24.3 mm with 23 parts on 14 nets, routed with 80 tracks and 4 vias.
It is built around the ATTINY9-TSH, TLV4906K and AON7296. Its parts include 7 resistors, 4 capacitors, 3 ICs, 3 diodes and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R5 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 4,7nF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 1 | 1,2k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 200R | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | AON7296 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.7x2.05mm | Q1 |
| 1 | ATtiny9-TS | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | DIODE | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | LD2980ABM33TR | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | LOGO | filmy i zdjęcia:UNIVERSE | G*** |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | filmy i zdjęcia:LOGO2 | G*** |
| 1 | Pow_In | SIM800L (1):1 pad tht | J1 |
| 1 | Pow_Out | SIM800L (1):1 pad tht | J2 |
| 1 | RED | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | TLV4906K | Package_TO_SOT_SMD:SC-59 | U1 |

Louisiana-State-Rocketry/FLCM0001-A03_PCB
PCB Files for the Eclipse 2 Flight Computer.

Telekomak/FiresportTimer
An open source firesport timer designed for "fire attack" discipline



google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



It measures 9 × 24.3 mm and has 2 copper layers, 1 mm thick.
23 parts, built around the ATTINY9-TSH, TLV4906K and AON7296. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the US-air-force999/Magnetic-Switch repository on GitHub, at the commit this page was made from: the board is Magnetic-Switch/Hardware/Magnetic switch/Magnetic switch.kicad_pcb and its schematic Magnetic-Switch/Hardware/Magnetic switch/Magnetic switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).