2 layers167.8 × 200.6 mm
Random Jazz Generator
telec16/modular-synth
Little side project, don't expect much updates.
132 parts16
2 layers40 × 200 mm
Little side project, don't expect much updates.
- Size
- 40 × 200 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 57
- Pads
- 194
- Tracks, vias
- 306, 50
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 May 2020
- Updated
- 25 Jul 2023
Overview
VCA is an open-source printed circuit board by telec16, from the telec16/modular-synth repository on GitHub. It is a 2-layer board of 40 × 200 mm with 57 parts on 57 nets, routed with 306 tracks and 50 vias.
It is built around the TL082 and LM13700M. Its parts include 24 resistors, 7 connectors, 6 capacitors, 6 diodes and 5 ICs.
Main components
2
TL082
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 13V/us 2 2.5nA 36V 3MHz 3mV 85dB Short-Circuit Protection SOP-8 FET Input Amplifiers ROHSGcoreOperational Amplifier
LM13700M
SOIC-16-16V~-4.75V、4.75V~16V 0℃~+70℃ 110dB 2 2.6mA 20mA 400nA 4mV 50V/us 600nA 9.5V~32V SOIC-16 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
README
README.mdTelec's Modular Synth
Little side project, don't expect much updates.
List of stuff I want to make
| 0% | 10% | 20% | 50% | 65% | 70% | 75% | 80% | 100% |
|---|---|---|---|---|---|---|---|---|
| Idea | POC | Schematic | Layout | Artwork | Final checkup | Prod | Tests | Done |
Modules
- VCO
- 3340
- Schmitt inverter
- Opamp V1
- Opamp V2
- LFO
- Hex Inverter
- Sequencer
- µC
- random jazz generator
- Random generator
- zener
- µC
- ADSR
- Opamp
- Opamp
- VCA
- LM13700
- Vactrol
- LM13700
- Quantizer (CV correction)
- µC
- µC
- VCF
- ?
- Drum kit
- ???
- Frequency multiplier/divider
- CD4046 PLL V1
- CD4046 PLL V2
- CD4046 PLL V1
- Wavefolder
- Bipolar
- Opamp
- Bipolar
- CV Glider
- RC circuit
- RC circuit
- Scope
- µC
- µC
Instruments
- MiniSynth
- MIDI I/O + CV Out keypad
Releases
- ADSR
- CV Glider
- VCA
- Wavefolder
- VCO
- PLL
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 6 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R3, R6, R13, R14, R17 |
| 4 | 100k | telec:Potentiometer_Single_Vertical_Hole | RV1, RV2, RV4, RV5 |
| 4 | 2k2 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4, R5, R15, R16 |
| 4 | LED | LED_SMD:LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm | D1, D2, D3, D4 |
| 4 | TL082 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4, U5 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R9, R20 |
| 2 | 1k | telec:Potentiometer_P3.81mmx5.12mm_Vertical | RV3, RV6 |
| 2 | 1k5 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R23, R24 |
| 2 | 22k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R8, R19 |
| 2 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R12 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Castellated | D5, D6 |
| 2 | Mounting_Holes | Kosmo_panel:Kosmo_Panel_Dual_Mounting_Holes | H1, H2 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R18 |
| 1 | 120k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R10 |
| 1 | 12k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R7 |
| 1 | 150k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R21 |
| 1 | 220k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R11 |
| 1 | 27k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R22 |
| 1 | CV1 | telec:Jack_Hole_Square | J2 |
| 1 | CV2 | telec:Jack_Hole_Square | J5 |
| 1 | EuroPower | telec:EuroPower | J1 |
| 1 | IN1 | telec:Jack_Hole_Square | J3 |
| 1 | IN2 | telec:Jack_Hole_Square | J6 |
| 1 | LM13700 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | OUT1 | telec:Jack_Hole_Square | J4 |
| 1 | OUT2 | telec:Jack_Hole_Square | J7 |
| 1 | telec | logo:telec-16 | LOGO1 |
Questions
How big is the VCA PCB?
It measures 40 × 200 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VCA use?
57 parts, built around the TL082 and LM13700M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VCA KiCad files?
From the telec16/modular-synth repository on GitHub, at the commit this page was made from: the board is VCA/VCA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the VCA design in my own project?
Its repository states no licence, so its author keeps all rights: ask telec16 before reusing the design.
More from telec16/modular-synth
11- 2 layers102.5 × 200 mm
- 2 layers50 × 174 mm
- 2 layers50 × 200 mm
- 2 layers50 × 200 mm
- 2 layers25 × 200 mm
- 2 layers25 × 200 mm
- 2 layers30 × 200 mm
- 2 layers25 × 200 mm
- 2 layers25 × 200 mm
- 2 layers
Similar boards
- 2 layers106.9 × 101.6 mm
- 2 layers49.8 × 44.3 mm
- 2 layers37 × 113.9 mm
- 2 layers27.9 × 101.6 mm
MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT - 2 layers65 × 100 mm
- 2 layers29.5 × 100 mm
BYOM VCF main
clacktronics/EuroClack_BYOM_Modules
In this repository is all the modules in the book for Build Your Own Modular the Clacktronics ring binder product to build your own modular synthesizer from scratch. clacktronics.co.uk/byom/.
38 parts58 - 2 layers70.5 × 128.3 mm
- 2 layers233.7 × 172.2 mm
Overcycler3
gligli/overcycler
Affordable DIY polyphonic hybrid single cycle / analog synthesizer
335 parts45GPL-3.0