2 layers167.8 × 200.6 mm
Random Jazz Generator
telec16/modular-synth
Little side project, don't expect much updates.
132 parts16
2 layers30 × 200 mm
Little side project, don't expect much updates.
- Size
- 30 × 200 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 52
- Pads
- 182
- Tracks, vias
- 296, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 May 2020
- Updated
- 25 Jul 2023
Overview
Scope is an open-source printed circuit board by telec16, from the telec16/modular-synth repository on GitHub. It is a 2-layer board of 30 × 200 mm with 49 parts on 52 nets, routed with 296 tracks and 33 vias.
It is built around the PIC18F26Q43-I/SS, TL082 and L7805. Its parts include 14 resistors, 8 capacitors, 6 connectors, 4 ICs and 4 diodes. It belongs with the PIC boards of this library.
Main components
3
PIC18F26Q43-I/SS
SSOP-28-40℃~+85℃ 1.8V~5.5V 12bit 1KB 25 4KB 64KB 64MHz 8 Bit 8bit Built-in FLASH PIC SSOP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TL082
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 13V/us 2 2.5nA 36V 3MHz 3mV 85dB Short-Circuit Protection SOP-8 FET Input Amplifiers ROHSGcoreOperational Amplifier
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdTelec's Modular Synth
Little side project, don't expect much updates.
List of stuff I want to make
| 0% | 10% | 20% | 50% | 65% | 70% | 75% | 80% | 100% |
|---|---|---|---|---|---|---|---|---|
| Idea | POC | Schematic | Layout | Artwork | Final checkup | Prod | Tests | Done |
Modules
- VCO
- 3340
- Schmitt inverter
- Opamp V1
- Opamp V2
- LFO
- Hex Inverter
- Sequencer
- µC
- random jazz generator
- Random generator
- zener
- µC
- ADSR
- Opamp
- Opamp
- VCA
- LM13700
- Vactrol
- LM13700
- Quantizer (CV correction)
- µC
- µC
- VCF
- ?
- Drum kit
- ???
- Frequency multiplier/divider
- CD4046 PLL V1
- CD4046 PLL V2
- CD4046 PLL V1
- Wavefolder
- Bipolar
- Opamp
- Bipolar
- CV Glider
- RC circuit
- RC circuit
- Scope
- µC
- µC
Instruments
- MiniSynth
- MIDI I/O + CV Out keypad
Releases
- ADSR
- CV Glider
- VCA
- Wavefolder
- VCO
- PLL
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C5, C6, C7, C8 |
| 5 | 100k | telec:Potentiometer_Single_Vertical_Hole | RV1, RV2, RV4, RV5, RV6 |
| 4 | 1N4148 | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4 |
| 4 | 33k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4, R7, R11, R14 |
| 4 | 68k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R8, R9 |
| 4 | SW | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 2 | 120k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5, R12 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3, R10 |
| 2 | 20k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R6, R13 |
| 2 | Mounting_Holes | Kosmo_panel:Kosmo_Panel_Dual_Mounting_Holes | H1, H2 |
| 2 | TL082 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | 100k | telec:Potentiometer_P3.81mmx5.12mm_Vertical | RV3 |
| 1 | 10u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C3 |
| 1 | 1u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C4 |
| 1 | Conn_Pickit_5 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | DAC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | EuroPower | telec:EuroPower | J3 |
| 1 | IN1 | telec:Jack_Hole_Square | J1 |
| 1 | IN2 | telec:Jack_Hole_Square | J2 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U3 |
| 1 | PIC18F26Q43 | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U5 |
| 1 | SSD1306 | telec:SSD1306_096in_I2C | J5 |
| 1 | telec | logo:telec-8 | LOGO1 |
Questions
How big is the Scope PCB?
It measures 30 × 200 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Scope use?
49 parts, built around the PIC18F26Q43-I/SS, TL082 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Scope KiCad files?
From the telec16/modular-synth repository on GitHub, at the commit this page was made from: the board is Scope/Scope.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Scope design in my own project?
Its repository states no licence, so its author keeps all rights: ask telec16 before reusing the design.
More from telec16/modular-synth
11- 2 layers102.5 × 200 mm
- 2 layers50 × 174 mm
- 2 layers50 × 200 mm
- 2 layers50 × 200 mm
- 2 layers25 × 200 mm
- 2 layers40 × 200 mm
- 2 layers25 × 200 mm
- 2 layers25 × 200 mm
- 2 layers25 × 200 mm
- 2 layers
Similar boards
- 4 layers345 × 213.3 mm
Boom-1-Top
jdotw/OpInst-Bass-1
Three-voice analog synth with a digital control surface using CEM3340, AS3320 and similar discrete analog components.
1,029 parts4 - 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers220.9 × 128.5 mm
Arduino TarbleMing
MiguelDeTrool/tarbleming
Arduino Nano based random looping sequencer Eurorack module
118 parts14 - 2 layers100 × 100 mm
- 2 layers70 × 100 mm
Korg ms x
jostsalathe/korg_ms-x
An extreme MONOTRON mod by Soul Machine in form of an SMD PCB
211 parts2 - 2 layers99.5 × 99.5 mm
Alimentatore JM
dario0603/power_supply
Progetto universitario per la realizzazione e simulazione di un Alimentatore da Banco Stabilizzato , completo di schemi elettrici KiCad, simulazioni LTspice, documentazione tecnica e file Gerber per la produzione del…
120 parts - 2 layers82 × 72.2 mm
- 2 layers162.8 × 99.9 mm
PSU
Sakib-Ansari/Linear_Programmable_Power_Supply
This repository contains the complete KiCad project for a multi-board linear programmable bench power supply. The design is organized into separate PCBs, including the Power Board, Control Board, Front Panel, Output…
133 partsMIT