Skip to the content
2 layers10 × 150 mmAddressableProgressbar, the printed circuit board in 3D

AddressableProgressbar

Teknikens-Hus/Open-Hardware

Various open hardware projects

Size
10 × 150 mm
Copper layers
2
Thickness
1.6 mm
Parts
50
Nets
51
Pads
195
Tracks, vias
403, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Dec 2024
Updated
30 Jul 2026

Overview

AddressableProgressbar is an open-source printed circuit board by Teknikens-Hus, from the Teknikens-Hus/Open-Hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 10 × 150 mm with 50 parts on 51 nets, routed with 403 tracks and 0 vias.

It is built around the WS2812B-2020. Its parts include 48 diodes and 1 connector.

Main components

1

README

ESP32-ALED-Controller/README.md

ESP32 ALED Controller

A simple addressable LED strip controller based on the ESP32 D1 Mini development board. ESP32 ALED Controller

Summary

  • ESP32 D1 Mini - Main microcontroller board
  • SN74AHCT125N - 3.3V to 5V level shifter for LED data signal
  • Capacitors - Power filtering capacitors for both 5V and 3.3V rails
  • 4 Data outputs - Drive 4 WS2811B or 2 APA102 LED strips (or other clock+data addressable LEDs)
  • Separate power input - 5V-24V power input for the LED strips and 5V input for the ESP32 D1 Mini
  • Relay output - Control a relay for switching power to the LED strips to reduce power consumption when LEDs are off
  • Glas fuse - Protection for the LED input power line (Wise to add a external fuse per LED strip if powering multiple strips)

Pinout

  • LED 1 Data - GPIO18
  • LED 2 Data - GPIO23
  • LED 3 Data - GPIO21
  • LED 4 Data - GPIO22
  • Relay Control - GPIO13 (V1 GPIO14)

Additional LEDs

The additonal data outputs (2-3) are disabled by default. To enable them, cut the jumper traces on the bottom side of the PCB and bridge it to the opposite side.

Data Resistors

Add data resistors for each data line. 33-200Ω is recommended. For the proper value, check the data line with an oscilloscope and try different resistors to find which provides the best square wave signal.

Revisions

  • V1.1 Fix Capacitor placement
  • V2 Add spare gpio pin headers

Parts

50
QtyValueFootprintReferences
48WS2812B-2020LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1LOGOGraphics:teknikenshus-text-logoG***

More from Teknikens-Hus/Open-Hardware

9
  • 4 layers100 × 60 mmESP32-RS485, the printed circuit board in 3D

    ESP32-RS485

    Teknikens-Hus/Open-Hardware

    Various open hardware projects

    49 partsGPL-3.0
  • 2 layersIR DetectorRing, the printed circuit board in 3D

    IR DetectorRing

    Teknikens-Hus/Open-Hardware

    Various open hardware projects

    35 partsGPL-3.0
  • 2 layers49.3 × 100 mmESP-32-Module Breakout, the printed circuit board in 3D

    ESP-32-Module Breakout

    Teknikens-Hus/Open-Hardware

    Various open hardware projects

    31 partsGPL-3.0
  • 2 layers40 × 100 mmESP32-ALED Controller, the printed circuit board in 3D

    ESP32-ALED Controller

    Teknikens-Hus/Open-Hardware

    Various open hardware projects

    30 partsGPL-3.0
  • 2 layers70 × 59 mmESP32-Breakout, the printed circuit board in 3D

    ESP32-Breakout

    Teknikens-Hus/Open-Hardware

    Various open hardware projects

    28 partsGPL-3.0
  • 2 layers68 × 54 mmMCP23017 Expander, the printed circuit board in 3D

    MCP23017 Expander

    Teknikens-Hus/Open-Hardware

    Various open hardware projects

    24 partsGPL-3.0
  • 2 layers48 × 70.5 mmESP32-D1-Mini DF Player, the printed circuit board in 3D

    ESP32-D1-Mini DF Player

    Teknikens-Hus/Open-Hardware

    Various open hardware projects

    16 partsGPL-3.0
  • 2 layers30 × 42 mmESP32-M2-Module Simple, the printed circuit board in 3D

    ESP32-M2-Module Simple

    Teknikens-Hus/Open-Hardware

    Various open hardware projects

    15 partsGPL-3.0

Similar boards

  • 4 layers16.9 × 119.4 mmOrbit, the printed circuit board in 3D

    Orbit

    earthtojake/text-to-cad

    Design physical products with AI

    182 parts26kMIT
  • 2 layers240 × 240 mmKfchess, the printed circuit board in 3D

    Kfchess

    misprit7/real-time-chess

    A physical chess board without the concept of turns

    235 parts254MIT
  • 2 layers26 × 28 mmESP32-S3-Expansion, the printed circuit board in 3D

    ESP32-S3-Expansion

    SpacehuhnTech/framework

    ESP32-S3 Framework Expansion Card

    22 parts69CERN-OHL-P-2.0
  • 2 layers86 × 54 mmLLM Business Card, the printed circuit board in 3D

    LLM Business Card

    pham-tuan-binh/bouija

    Running LLM on a Business Card LITERALLY

    84 parts60
  • 2 layers31.9 × 36 mmLemon pcb swizzle, the printed circuit board in 3D

    Lemon pcb swizzle

    rianadon/Cosmos-Keyboard-PCBs

    Open-Source keyboard PCB designs for the Cosmos Keyboard Generator

    63 parts43
  • 6 layers155.5 × 194.6 mmNerdEKO Gamma NoATX, the printed circuit board in 3D

    NerdEKO Gamma NoATX

    phil31/NerdEKO-Gamma

    fork of the NerdOCTAXE-Gamma design (https://github.com/Patsch91/NerdOCTAXE-Gamma), with 12 x BM1370 (14TH/s SHA256)

    499 parts42

Questions

How big is the AddressableProgressbar PCB?

It measures 10 × 150 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AddressableProgressbar use?

50 parts, built around the WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AddressableProgressbar KiCad files?

From the Teknikens-Hus/Open-Hardware repository on GitHub, at the commit this page was made from: the board is AddressableProgressbar/AddressableProgressbar.kicad_pcb and its schematic Adafruit AudioFX Breakout/Adafruit AudioFX Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AddressableProgressbar design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).