

Robot
All 3D CAD and PCB design files for smartphone-robot project.
- Size
- 80 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 370
- Nets
- 270
- Pads
- 1,339
- Tracks, vias
- 2,112, 691
- Pours
- 102
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jan 2026
- Updated
- 28 Aug 2026
Overview
Robot is an open-source printed circuit board by tekkura, from the tekkura/sr-cad repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 80 × 70 mm with 370 parts on 270 nets, routed with 2,112 tracks and 691 vias.
It is built around the TPD1E05U06DPY, AP2502KTR-G1 and TVS0500DRV, with the BQ27742YZFR-G1, SMD0603-050 and SMF13A among its other parts. Its parts include 137 capacitors, 105 resistors, 17 ICs, 7 diodes and 6 transistors. It belongs with the robots and motor control boards of this library.
Main components
10TPD1E05U06DPY
DFN21 Channel ESD Protection Device for Super-Speed (up to 6 Gbps) InterfaceTexas InstrumentsUncategorisedAP2502KTR-G1
SOT-23-6-40℃~+85℃ 1% 150kHz 20mA 2V~6V 4 Built-in Over-Temperature Protection (OTP) PWM SOT-23-6 LED Drivers ROHSDiodes IncorporatedLED DriversTVS0500DRV
WSON-6(2x2)-40℃~+125℃ 155pF 400W@8/20us 43A@8/20us 5V 7.9V 70pA 9.2V IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional WSON-6(2x2) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)BQ27742YZFR-G1
DSBGA-15-40℃~+85℃ 1 167uA 2.438V 2.8V~5V I2C、HDQ Lithium Battery Protection IC、Monitoring IC Support DSBGA-15 Battery Management ROHSTexas InstrumentsBattery ManagementSMD0603-050
0603-40℃~+85℃ 100ms 100mΩ 1A 40A 500mA 500mW 6V 800mΩ 0603 Resettable Fuses ROHS台湾陆海Resettable FusesSMF13A
SOD-123FL-55℃~+150℃ 13V 15.9V 1uA 200W@10/1000us 21.5V 9.3A@10/1000us TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSShandong Jingdao MicroelectronicsESD And Surge Protection (TVS/ESD)JS202011JCQN
SMD-40℃~+85℃ 3.6mm 300mA 5,000 cycles 5.5mm 6V 9mm Black DPDT J-Lead Rectangular Columnar Surface Mount,Vertical SMD Slide Switches ROHSC&KSlide SwitchesAS2312
SOT-23-55℃~+150℃ 1 N-channel 1.25W 1.2V 120pF 20V 50mΩ@1.8V 5A 650pF SOT-23 MOSFETs ROHSAnBonMOSFETsECS-120-8-36-CKM-TR3
SMD2520-4P-20℃~+70℃ 12MHz 150Ω 8pF ±10ppm ±10ppm SMD2520-4P Crystals ROHSECSCrystalsEFC8811R-TF
CSP-6(1.8x3.5)-55℃~+150℃ 1.3V 100nC@4.5V 12V 2 N-Channel 2.5W 27A 3.2mΩ@4.5V Common Drain N-Channel ±8V CSP-6(1.8x3.5) MOSFETs ROHSonsemiMOSFETs
README
README.mdCAD for the OIST smartphone robots
This repository contains the CAD files for the OIST smartphone robots.
- ./body contains standard 3D CAD files used for the robot's 3D printed body.
- ./pcb contains the KiCad files for the robot's PCB and schematic design.
These two subprojects (body and pcb) have direct dependencies on each other as the 3D CAD design is based on the PCB design. It is likely a good idea to manage the development of each on a separate branch and merge them together when necessary.
Parts
370| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 0.1uF | robot:C_0402_1005Metric | C11, C12, C13, C14, C15, C16, C24, C32, C102, C103, C104, C113, C114, C116, C119, C121 +28 |
| 26 | SMD_0603 | robot:TestPoint_SMD_0603 | TP1, TP2, TP10, TP11, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24 +10 |
| 21 | 1uF | robot:C_0402_1005Metric | C4, C10, C21, C22, C29, C47, C48, C50, C51, C52, C53, C54, C55, C69, C105, C126 +5 |
| 21 | NetTie_2 | robot:NetTie-_SMD_Pad6mil | NT1, NT2, NT3, NT4, NT10, NT11, NT12, NT13, NT14, NT15, NT16, NT17, NT18, NT20, NT21, NT22 +5 |
| 19 | 0 | robot:R_0603_1608Metric | R10, R57, R75, R76, R79, R80, R81, R82, R83, R84, R85, R86, R87, R88, R90, R91 +3 |
| 16 | 10uF | robot:C_0603_1608Metric | C17, C20, C25, C27, C42, C43, C67, C68, C75, C77, C80, C129, C130, C132, C134, C136 |
| 13 | 0 | robot:R_0805_2012Metric | R11, R52, R54, R67, R68, R69, R70, R71, R72, R73, R74, R77, R78 |
| 11 | 100uF | robot:C_1206_3216Metric | C79, C82, C83, C91, C96, C106, C107, C108, C109, C125, C127 |
| 10 | TPD1E05U06 | robot:TPD1E05U06DPYR | U15, U19, U20, U21, U22, U23, U26, U27, U28, U29 |
| 8 | 100k | robot:R_0603_1608Metric | R12, R17, R49, R59, R60, R61, R89, R99 |
| 7 | 100 | robot:R_0603_1608Metric | R22, R23, R24, R25, R56, R58, R97 |
| 7 | 22uF | robot:C_0603_1608Metric | C1, C33, C34, C76, C78, C87, C93 |
| 7 | TestPoint | robot:KEYSTONE_5002 | TP30, TP34, TP39, TP40, TP41, TP42, TP43 |
| 6 | 10 | robot:R_0402_1005Metric | R6, R7, R32, R33, R41, R42 |
| 6 | 2.2k | robot:R_0603_1608Metric | R14, R15, R20, R21, R34, R35 |
| 6 | 27pF | robot:C_0402_1005Metric | C2, C3, C18, C19, C45, C46 |
| 5 | 100uF | robot:C_1210_3225Metric | C131, C133, C135, C137, C138 |
| 5 | 1k | robot:R_0402_1005Metric | R1, R5, R46, R47, R50 |
| 5 | 200 | robot:R_0603_1608Metric | R43, R45, R103, R104, R105 |
| 5 | 4.7uF | robot:C_0603_1608Metric | C23, C97, C100, C101, C124 |
| 4 | 0.39 | robot:R_0603_1608Metric | R26, R27, R29, R30 |
| 4 | 100uF | robot:CP_Elec_APXJ100ARA271MF61G | C74, C86, C89, C90 |
| 4 | 10k | robot:R_0603_1608Metric | R28, R31, R96, R102 |
| 4 | MountingHole | robot:MountingHole_2.2mm_M2_2mm_clearance | H1, H2, H5, H6 |
| 3 | 10nF | robot:C_0402_1005Metric | C84, C115, C118 |
| 3 | 22nF | robot:C_0402_1005Metric | C110, C117, C120 |
| 3 | SMF13A | robot:D_SOD-123F | D4, D6, D10 |
| 2 | 0.22uF | robot:C_0603_1608Metric | C30, C31 |
| 2 | 0.47uF | robot:C_0603_1608Metric | C26, C56 |
| 2 | 0.47uH | robot:Vishay-IHLP-2020BZ-FP_1.905x2.79-3D_2.0-0-0-MFG | L2, L4 |
| 2 | 1.5uH | robot:NRS6028T1R5NMGJ | L1, L3 |
| 2 | 120k | robot:R_0603_1608Metric | R38, R40 |
| 2 | 2.2uF | robot:C_0603_1608Metric | C28, C49 |
| 2 | 200k | robot:R_0603_1608Metric | R19, R36 |
| 2 | 27 | robot:R_0402_1005Metric | R3, R4 |
| 2 | 3.3nF | robot:C_0402_1005Metric | C112, C122 |
| 2 | 47K | robot:R_0603_1608Metric | R8, R18 |
| 2 | 47nF | robot:C_0402_1005Metric | C123, C128 |
| 2 | 5.1k | robot:R_0603_1608Metric | R63, R64 |
| 2 | 649k | robot:R_0603_1608Metric | R37, R39 |
| 2 | Conn_01x06_MountingPin | robot:CONN_B6B-ZR-SM4-TF_JST | J3, J5 |
| 2 | DNP | robot:R_0603_1608Metric | R13, R66 |
| 2 | DRV8830DRCR | robot:IC_DRV8830DRCR | U8, U9 |
| 2 | IN4448HLP | robot:D_0402_1005Metric | D9, D11 |
| 2 | JS202011JCQN | robot:SW_JS202011JCQN | S3, S4 |
| 2 | MountingHole | robot:MountingHole_2.2mm_M2 | H3, H4 |
| 2 | Q_NMOS_GDS | robot:SOT-23 | Q1, Q7 |
| 2 | SN74AHC125RGYR | robot:SN74AHC125RGYR | Q5, Q6 |
| 2 | TVS0500DRV | robot:TVS0500DRVR | U24, U25 |
| 2 | TestPoint | robot:THT_JumperLead | TP28, TP29 |
| 1 | 0 | robot:R_0603_1608Metric_3pin_Switch | R95 |
| 1 | 1.5nF | robot:C_0402_1005Metric | C111 |
| 1 | 100k | robot:R_0402_1005Metric | TH2 |
| 1 | 10M | robot:R_0603_1608Metric | R65 |
| 1 | 10m | robot:R_1206_3216Metric | R51 |
| 1 | 113K | robot:R_0603_1608Metric | R53 |
| 1 | 14k | robot:R_0603_1608Metric | R55 |
| 1 | 150k | robot:R_0402_1005Metric | R98 |
| 1 | 16k | robot:R_0603_1608Metric | R62 |
| 1 | 220k | robot:R_0402_1005Metric | R100 |
| 1 | 2k | robot:R_0603_1608Metric | R48 |
| 1 | 47uF | robot:C_0805_2012Metric | C81 |
| 1 | 510k | robot:R_0603_1608Metric | R16 |
| 1 | 5m | robot:R_0805_2012Metric | R44 |
| 1 | 6.8k | robot:R_0402_1005Metric | R101 |
| 1 | 80.6k | robot:R_0402_1005Metric | R9 |
| 1 | AP2502KTR-G1 | robot:SOT95P280X145-6N | U7 |
| 1 | AP33771DKZ-13 | robot:AP33771DKZ13 | U18 |
| 1 | AS2312 | robot:SOT-23 | Q3 |
| 1 | BQ27742YZFR-G1 | robot:Texas_Instruments-YZF0015-0-0-MFG | U12 |
| 1 | Conn_01x02 | robot:THT_Pitch5mm_Drill1.2mm | J8 |
| 1 | Conn_01x05 | robot:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | DNP | robot:R_0402_1005Metric | R2 |
| 1 | DNP | robot:battery26650_thermistor | TH1 |
| 1 | DNP | robot:battery26650 | BT2 |
| 1 | DNP | robot:battery26650_holderOnly | BT1 |
| 1 | D_Schottky | robot:SD2114S040S8R0 | D7 |
| 1 | ECS-120-8-36-CKM-TR3 | robot:XTAL_ECS-120-8-36-CKM-TR3 | Y1 |
| 1 | EFC8811R-TF | robot:ON_Semiconductor-568AL-10_2013-O-MFG | Q2 |
| 1 | LED-Amber | robot:B12H1UYG-20D000134U1930 | D3 |
The 349 most common of 370 parts.
More from tekkura/sr-cad
1- 2 layers59.7 × 17 mm

Similar boards
- 4 layers55 × 73.5 mm

- 4 layers24 × 75 mm

The guesser
Mines-Rocketry-Club/flight-computers
Fully open source high power rocketry flight computers.
117 parts7GPL-3.0 - 4 layers62.9 × 88.3 mm

Airgradient go main
Open-Air-Foundation/pcb-go
AirGradient GO is a handheld air quality monitor. It measures particulate matter (Sensirion SPS30), CO₂ (Senseair S12), VOC/NOx (SGP41), temperature and humidity (SHT4x), and barometric pressure (DPS368), with an…
194 parts1CC-BY-SA-4.0 - 4 layers

Bms 18650
1atabey1/enfitnix-bat-converter
Battery protection board that turns regular 18650 cells into ones that are compatible with the Enfitnix Navi series lights
10 parts - 2 layers50 × 100 mm

Spark AE PCB
clectric-diy/Spark-AE
Spark-AE is a synth module designed for the AE Modular format. It is based on the Daisy Seed embedded DSP platform.
162 partsCERN-OHL-S-2.0 - 4 layers94 × 74 mm

- 2 layers76 × 63.5 mm

PicoTracker
xiphonics/picoTracker-pcb
Buy the official kit at xiphonics store # Trademark Notice
98 parts36CC0-1.0 - 6 layers147 × 90 mm

Questions
How big is the Robot PCB?
It measures 80 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Robot use?
370 parts, built around the TPD1E05U06DPY, AP2502KTR-G1, TVS0500DRV and BQ27742YZFR-G1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Robot KiCad files?
From the tekkura/sr-cad repository on GitHub, at the commit this page was made from: the board is pcb/robot/robot.kicad_pcb and its schematic pcb/robot/Charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Robot design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).