Skip to the content
2 layers50 × 70 mmOnstepPiConnector, the printed circuit board in 3D

OnstepPiConnector

teeheee/OnstepPi2

An Onstep PCB with integrated Raspberry PI

Size
50 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
38
Pads
94
Tracks, vias
166, 19
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
22 Apr 2023
Updated
28 May 2023

Overview

OnstepPiConnector is an open-source printed circuit board by teeheee, from the teeheee/OnstepPi repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 70 mm with 18 parts on 38 nets, routed with 166 tracks and 19 vias.

It is built around the L7805 and IRF540N. Its parts include 3 capacitors, 2 connectors, 1 IC and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

OnStepX Telescope Controller

Important

There is no release of OnStepX yet but it has basic testing done now and all features are implemented so I consider it ready testing by advanced OnStep users.

What is OnStepX?

OnStepX is the advanced version of the OnStep computerized telescope controller with support for both stepper motors (step/dir interface) and servo motors (PD or II interface using AB quadrature or CW/CCW or Pulse/Dir encoders.)

It supports:

  • Telescope Mount control (Alt/Azm and Equatorial GEM/Fork.) Optional support for Eq mounts with Tangent Arm Declination. Usually the Goto capability is enabled, but that's optional as well for those who just want basic mount control.
  • Telescope Rotator control (including Alt/Azm de-rotation.)
  • Telescope Focuser control (up to 6 focusers so it can handle collimation as well as focusing.)
  • Telescope Accessory control (combination of up to 8 dew-heaters, switches, analog PWM.)

Features

OnStepX supports a wide variety of connection options. Several serial "command channels" can be utilized. One of the these is normally devoted to a USB connection and for the other(s) choose from the following:

  • Bluetooth
  • ESP8266 WiFi
  • Arduino M0/Ethernet Shield
  • Even another USB port or RS232 serial isn't very difficult to add.

In the case of running OnStepX on an ESP32 it can provide its own Bluetooth or WiFi IP command channels without additional hardware by simply activating the feature in OnStepX.

Other software in the OnStep ecosystem include:

  • an ASCOM driver (with IP and Serial support),
  • an Android App useable over WiFi or Bluetooth equipped Phones/Tablets,
  • a "built-in" website (on the Ethernet and/or WiFi device),
  • a full planetarium program that controls all features (Sky Planetarium).

OnStep is compatible with the LX200 protocol. This means it can be controlled from other planetarium software, like: Sky Safari, CdC (even without ASCOM), Stellarium, etc.

There are also INDI drivers so it can be used from Linux, with CdC or KStars.

Documentation

Detailed documentation, including the full set of features, detailed designs for PCBs, instructions on how to build a controller, how to configure the firmware for your particular mount, can all be found the OnStep Group Wiki.

Change Log

All the changes are tracking in git, and a detailed list can be accessed using the following git command:

git log --date=short --pretty=format:"%h %ad %<(20)%an %<(150,trunc)%s"

Support

Questions and discussion should be on the mailing list (also accessible via the web) at the OnStep Group.

License

OnStep is open source free software, licensed under the GPL.

See LICENSE.txt file.

Author

Howard Dutton

Parts

18
QtyValueFootprintReferences
2C_PolarizedCapacitor_THT:CP_Radial_D8.0mm_P2.50mmC1, C2
2Conn_01x04Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalI2C, Motor
2Jumper_3_OpenConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalVCC I2C, VCC PEC
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1CCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
1Conn_01x02Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalPower
1Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalPEC
1Conn_01x16_MaleConnector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_VerticalJ2
1DB9_Male_MountingHolesConnector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mmJ1
1IRF540NPackage_TO_SOT_THT:TO-220-3_Horizontal_TabDownQ1
1L7805Package_TO_SOT_THT:TO-220-3_Horizontal_TabDownU1

The 14 most common of 18 parts.

More from teeheee/OnstepPi

1
  • 2 layers173 × 139 mmOnstepPi, the printed circuit board in 3D

    OnstepPi

    teeheee/OnstepPi

    An Onstep PCB with integrated Raspberry PI

    69 parts2GPL-3.0

Similar boards

  • 2 layers96.8 × 97 mmPsoc5power, the printed circuit board in 3D

    Psoc5power

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    133 parts59
  • 4 layers90 × 100 mmPanel light control, the printed circuit board in 3D

    Panel light control

    MayaPosch/LEDNip

    STM32F427-based developer board with 5 channels for controlling LEDs.

    163 parts3BSD-3-Clause
  • 4 layers360 × 200 mmRgb switcher, the printed circuit board in 3D

    Rgb switcher

    michaelobed/rgb-switcher

    An open-source switcher for analogue RGBS video, so you don't have to.

    133 parts3MIT
  • 2 layers48 × 75.3 mmSmartPlant, the printed circuit board in 3D

    SmartPlant

    aleksul/SmartPlant

    SmartPlant is a simple project that will help you automate watering of your plants.

    37 parts2MIT
  • 2 layers99.1 × 33.5 mmEcu v2, the printed circuit board in 3D

    Ecu v2

    deninur2427/ecu_pnm

    Custom Engine Control Unit for LPG

    60 parts2MIT
  • 2 layersEPS, the printed circuit board in 3D

    EPS

    Amr-H25/CubeSat-EarthObservation

    A simulated CubeSat for Earth observation: captures images and transmits them to a ground station for processing and analysis. Final-year graduation project at Helwan University.

    49 parts1
  • 2 layers100 × 100 mmCarteSolarTestBench, the printed circuit board in 3D

    CarteSolarTestBench

    mbriday/solarTestBench

    solar test bench for low power embedded system

    64 parts1
  • 2 layersGB2, the printed circuit board in 3D

    GB2

    Andy18650/GB2-2025-team4

    GitHub repository for Cambridge University Engineering part IIA project GB2: Electrical Power, Team 4

    167 partsGPL-3.0

Questions

How big is the OnstepPiConnector PCB?

It measures 50 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OnstepPiConnector use?

18 parts, built around the L7805 and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OnstepPiConnector KiCad files?

From the teeheee/OnstepPi repository on GitHub, at the commit this page was made from: the board is layout/onstepPiConnector/onstepPiConnector.kicad_pcb and its schematic layout/onstepPiConnector/onstepPiConnector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the OnstepPiConnector design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).