Skip to the content
2 layersEPS, the printed circuit board in 3D

A simulated CubeSat for Earth observation: captures images and transmits them to a ground station for processing and analysis. Final-year graduation project at Helwan University.

Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
72
Pads
197
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
24 Apr 2025
Updated
8 Jul 2025

Overview

EPS is an open-source printed circuit board by Amr-H25, from the Amr-H25/CubeSat-EarthObservation repository on GitHub. It is a 2-layer board with 49 parts on 72 nets.

It is built around the L7805 and IRF540N. Its parts include 16 resistors, 10 connectors, 7 ICs, 5 diodes and 4 capacitors.

Main components

2

README

README.md

CubeSat-EarthObservation

A simulated CubeSat for Earth observation: captures images and transmits them to a ground station for processing and analysis. Final-year graduation project at Helwan University.

Parts

49
QtyValueFootprintReferences
510KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R3, R5, R15, R16
51N5817Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3, D4, D5
433KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR11, R12, R13, R14
447KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR7, R8, R9, R10
4MountingHoleMountingHole:MountingHole_3.2mm_M3_ISO14580H1, H2, H3, H4
3220Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2, R4, R6
3IRF540NPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3
1+XConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ2
1+YConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ4
1-XConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ3
1-YConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ5
10.1uFCapacitor_THT:CP_Radial_Tantal_D5.0mm_P2.50mmC2
10.33uFCapacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_HorizontalC3
1100nFCapacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_HorizontalC1
110uFCapacitor_THT:CP_Radial_Tantal_D5.0mm_P2.50mmC4
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ9
1Bat OutConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ8
1Battery Connector 3.7Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ6
1GPIOConnector_PinHeader_2.54mm:PinHeader_2x26_P2.54mm_VerticalJ1
1L7805Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalU5
1LD1117S33TR_SOT223Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalU6
1LM35-LPPackage_TO_SOT_THT:TO-92_InlineU1
1Solar OutConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ7
1UART_DEBUGConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ10
1YAAJ_BluePillLibrary:YAAJ_BluePill_1U2
1~Library:MT3608 ModuleU7
1~Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalU3
1~Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalU4

More from Amr-H25/CubeSat-EarthObservation

3
  • 2 layersADCS, the printed circuit board in 3D

    ADCS

    Amr-H25/CubeSat-EarthObservation

    A simulated CubeSat for Earth observation: captures images and transmits them to a ground station for processing and analysis. Final-year graduation project at Helwan University.

    24 parts1
  • 2 layersOBC, the printed circuit board in 3D

    OBC

    Amr-H25/CubeSat-EarthObservation

    A simulated CubeSat for Earth observation: captures images and transmits them to a ground station for processing and analysis. Final-year graduation project at Helwan University.

    16 parts1
  • 2 layersPayload & COMMS, the printed circuit board in 3D

    Payload & COMMS

    Amr-H25/CubeSat-EarthObservation

    A simulated CubeSat for Earth observation: captures images and transmits them to a ground station for processing and analysis. Final-year graduation project at Helwan University.

    16 parts1

Similar boards

  • 2 layers96.8 × 97 mmPsoc5power, the printed circuit board in 3D

    Psoc5power

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    133 parts59
  • 4 layers90 × 100 mmPanel light control, the printed circuit board in 3D

    Panel light control

    MayaPosch/LEDNip

    STM32F427-based developer board with 5 channels for controlling LEDs.

    163 parts3BSD-3-Clause
  • 4 layers360 × 200 mmRgb switcher, the printed circuit board in 3D

    Rgb switcher

    michaelobed/rgb-switcher

    An open-source switcher for analogue RGBS video, so you don't have to.

    133 parts3MIT
  • 2 layers48 × 75.3 mmSmartPlant, the printed circuit board in 3D

    SmartPlant

    aleksul/SmartPlant

    SmartPlant is a simple project that will help you automate watering of your plants.

    37 parts2MIT
  • 2 layers99.1 × 33.5 mmEcu v2, the printed circuit board in 3D

    Ecu v2

    deninur2427/ecu_pnm

    Custom Engine Control Unit for LPG

    60 parts2MIT
  • 2 layers100 × 100 mmCarteSolarTestBench, the printed circuit board in 3D

    CarteSolarTestBench

    mbriday/solarTestBench

    solar test bench for low power embedded system

    64 parts1
  • 2 layersGB2, the printed circuit board in 3D

    GB2

    Andy18650/GB2-2025-team4

    GitHub repository for Cambridge University Engineering part IIA project GB2: Electrical Power, Team 4

    167 partsGPL-3.0
  • 2 layers101.6 × 68.6 mmCubeProFanLedCtrlBoard, the printed circuit board in 3D

    CubeProFanLedCtrlBoard

    C3MA/CubeProRetrofit

    https://www.ccc-mannheim.de/wiki/CubePro

    23 parts

Questions

What parts does the EPS use?

49 parts, built around the L7805 and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EPS KiCad files?

From the Amr-H25/CubeSat-EarthObservation repository on GitHub, at the commit this page was made from: the board is Hardware/SubSystems PCBs/EPS/EPS.kicad_pcb and its schematic Hardware/SubSystems PCBs/ADCS/ADCS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EPS design in my own project?

Its repository states no licence, so its author keeps all rights: ask Amr-H25 before reusing the design.