2 layers63.5 × 53.3 mm
2 layers101.6 × 68.6 mm
CubeProFanLedCtrlBoard
C3MA/CubeProRetrofithttps://www.ccc-mannheim.de/wiki/CubePro
- Size
- 101.6 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 16
- Pads
- 62
- Tracks, vias
- 122, 10
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 May 2018
- Updated
- 31 Oct 2018
Overview
CubeProFanLedCtrlBoard is an open-source printed circuit board by C3MA, from the C3MA/CubeProRetrofit repository on GitHub. It is a 2-layer board of 101.6 × 68.6 mm with 23 parts on 16 nets, routed with 122 tracks and 10 vias.
It is built around the L7812, L7805 and IRF540N. Its parts include 16 connectors, 4 transistors and 3 ICs.
Main components
3
L7812
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 2V@(1A) 30V 71dB@(120Hz) 76uV Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1, J3, J5, J6, J11, J12 |
| 4 | Conn_01x01 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J7, J8, J9, J10 |
| 4 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 3 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J13, J14, J15 |
| 2 | L7812 | Package_TO_SOT_THT:TO-220-3_Vertical | U1, U3 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J4 |
| 1 | Conn_02x04_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J16 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal | J2 |
More from C3MA/CubeProRetrofit
1Similar boards
- 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers76.9 × 100 mm
Bo Tom V3
Chethien1912/Shrimp-Feed-Grinder-Motor-Driver-PCB
Board điều khiển động cơ máy xay thức ăn cho tôm
75 parts - 2 layers100 × 75 mm
RTSS Power Supply V2-5C
RadioThermal/RadioThermal_Soldering_OSHW
Open Source Hardware 470KHz Induction Soldering Iron
69 parts84CERN-OHL-P-2.0 - 2 layers140 × 75 mm
- 2 layers90 × 119 mm
Skid Steer 4x4 ESP32 DRV8833 PCB
retrobuiltRyan/4x4_Rover_ESP32
1:10 scale robot Rover with ESP32 and PS4 controller. Custom PCB for multi channel motor control
111 parts2BSD-3-Clause - 2 layers130 × 69 mm
Power supply
IsuriWeerarathne/Smart-BioGas-System
This Project is about a microcontroller-based hardware project on automated biogas system which done as a group project.
16 parts1 - 2 layers100 × 40 mm
- 2 layers254 × 134.1 mm
Questions
How big is the CubeProFanLedCtrlBoard PCB?
It measures 101.6 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CubeProFanLedCtrlBoard use?
23 parts, built around the L7812, L7805 and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CubeProFanLedCtrlBoard KiCad files?
From the C3MA/CubeProRetrofit repository on GitHub, at the commit this page was made from: the board is CubeProFanLedCtrlBoard/CubeProFanLedCtrlBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CubeProFanLedCtrlBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask C3MA before reusing the design.