

DCJ11 Mem2Disp2
DCJ11 Hack+ related boards and code
- Size
- 160 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 118
- Pads
- 368
- Tracks, vias
- 1,071, 271
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Jan 2024
- Updated
- 26 Mar 2026
Overview
DCJ11 Mem2Disp2 is an open-source printed circuit board by TechPaula, from the TechPaula/DCJ11Hack- repository on GitHub. It is a 4-layer board of 160 × 100 mm with 34 parts on 118 nets, routed with 1,071 tracks and 271 vias.
It is built around the HM62256BLP-7, 74AHC138D and 86093967113745ELF. Its parts include 11 capacitors, 7 resistors, 6 ICs, 3 diodes and 1 connector. It belongs with the FPGA and CPLD boards of this library.
Main components
3HM62256BLP-7
DIP28DIP28 New Arrivals ROHSHITUncategorised74AHC138D
SO-16-40℃~+125℃ 2V~5.5V 4uA 6.3ns@5V,50pF 74AHC 8mA 8mA Decoder Single Supply SO-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers86093967113745ELF
弯插,P=2.54mm2.54mm 3 96P Right Angle 弯插,P=2.54mm Board-to-Board and Backplane Connector ROHSAmphenolBoard-To-Board And Backplane Connector
README
Octal Display board/OctalBusDisplay/README.mdOctal Bus Display
This sadly never worked, and it also pulled a LOT of current (>2A), so I've abandoned it. D
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 4 | HDLx2416 | PaulasDisplays:HDLx2416 | DISP1, DISP2, DISP3, DISP4 |
| 3 | 470R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7 |
| 3 | 4K7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10 |
| 3 | LED | LTL-4221NHBP:LTL4221NHBP | D1, D2, D3 |
| 2 | HM62256BLP | Package_DIP:DIP-28_W15.24mm | U1, U5 |
| 2 | Logo_Open_Hardware_Large | PaulasKiCADFootPrint:Fox_avatar_18mm | SYM1, SYM1 |
| 2 | SST39SF010 | Package_DIP:DIP-32_W15.24mm | U2, U6 |
| 1 | 3K3 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 47uF 16V | Capacitor_SMD:CP_Elec_6.3x5.8 | C1 |
| 1 | 74AHC138 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | 86093967113745ELF | DIN41612_96_RA:86093967113745ELF | J1 |
| 1 | GAL16V8 | Package_DIP:DIP-20_W7.62mm | U3 |
More from TechPaula/DCJ11Hack-
3- 4 layers160 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 51 mm

Similar boards
- 4 layers306 × 244 mm

- 2 layers100 × 63.5 mm

ESE2RAM Cartridge
goriponsoft/ESE2RAM-Cartridge
Implementation of ESE-RAM using only general-purpose logic ICs (naming: ESE-ESE-RAM/ESE2-RAM).
29 parts8 - 2 layers172.7 × 63.5 mm

Pdsp1881 4x4
74hc595/kicad-intelligent-displays
KiCad symbols and footprints for HP/Litronix/Siemens/Osram/Avago/Broadcom intelligent alphanumeric LED displays
31 parts6 - 4 layers265.6 × 214.1 mm

Unibone.unrouted
QUniBone/QUniBoneClassic
"UniBone" connects a BeagleBone Black micro Linux system to ancient DEC UNIBUS, "QBone" does the same for DEC QBUS.
1,317 parts3BSD-2-Clause - 4 layers66 × 22.5 mm

Qspi soc pmod
FPGA-Research/qspi-flash-psram-pmod
A Pmod compatible PCB containing a QSPI Flash and PSRAM chips that can be selected through a decoder chip.
31 parts1 - 4 layers145.5 × 89.6 mm

- 4 layers133 × 93 mm

Project GP8B
JonathSpirit/GP8B
G_Processor8Bits a homemade without any microcontroller 8bits processor
110 parts - 4 layers406.4 × 254 mm

Questions
How big is the DCJ11 Mem2Disp2 PCB?
It measures 160 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DCJ11 Mem2Disp2 use?
34 parts, built around the HM62256BLP-7, 74AHC138D and 86093967113745ELF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DCJ11 Mem2Disp2 KiCad files?
From the TechPaula/DCJ11Hack- repository on GitHub, at the commit this page was made from: the board is RAMROMText Board/DCJ11_Mem2Disp2.kicad_pcb and its schematic CPU Board/InvLED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DCJ11 Mem2Disp2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask TechPaula before reusing the design.