2 layers84.2 × 100 mm
Fabpack out v5 8
yuz207/agentpad13
agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)
126 parts41
2 layers100 × 100 mm
Mechpad
techinc/mechpadmechanical keypad
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 87
- Nets
- 82
- Pads
- 553
- Tracks, vias
- 512, 131
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Oct 2023
- Updated
- 29 Jun 2024
Overview
Mechpad is an open-source printed circuit board by techinc, from the techinc/mechpad repository on GitHub. It is a 2-layer board of 100 × 100 mm with 87 parts on 82 nets, routed with 512 tracks and 131 vias.
It is built around the AP2112K-3.3, USBLC6-2SC6 and SK6812SIDE-A. Its parts include 32 diodes, 21 capacitors, 17 switches, 6 resistors and 4 connectors. It belongs with the STM32 boards of this library.
Main components
3
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
SK6812SIDE-A
SMD-4P,4x1.6mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 240mcd~450mcd 2mm 3.7V~5.5V 460nm~470nm 4mm 520nm~535nm 620nm~625nm 697.5mcd~1162.5mcd 800Kbit/s Built-in power-on reset circuit Translucent Frosted Lens SMD-4P,4x1.6mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdmechanical keypad
 |
|---|
 |
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C5, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +3 |
| 16 | D_Schottky | Diode_SMD:D_SOD-123 | D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 |
| 16 | SK6812SIDE-A | footprints:LED_SK6812SIDE-A_4020_pinlayout_asif50505-padssecure | D1, D2, D3, D4, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32 |
| 16 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 22 Ohm | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J4 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | STM32F072C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0 | footprints:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
The 83 most common of 87 parts.
Questions
How big is the Mechpad PCB?
It measures 100 × 100 mm and has 2 copper layers, 1 mm thick.
What parts does the Mechpad use?
87 parts, built around the AP2112K-3.3, USBLC6-2SC6 and SK6812SIDE-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mechpad KiCad files?
From the techinc/mechpad repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mechpad design in my own project?
Its repository states no licence, so its author keeps all rights: ask techinc before reusing the design.
Similar boards
- 4 layers46.1 × 45.6 mm
Avionics mainboard
AFS-pt/PROMETHEUS-1
Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1
202 parts15 - 4 layers112 × 75 mm
- 2 layers97 × 43.3 mm
- 2 layers100 × 25 mm
CereyanV1
fahreddinaykut/Cereyan
Battery-powered ESP32-C3 smart ventilation fan with magnetic mounting, ESP-NOW synchronization, USB-C charging and programmable mobile control.
67 parts - 4 layers90 × 70 mm
Robot hub rev3
dustin-lehmann/TWIPR
See https://github.com/dustin-lehmann/TWIPR/wiki for descriptions on how to use the hardware and software
278 parts1 - 2 layers95 × 95 mm
- 2 layers66.7 × 121 mm
