2 layers101.6 × 147.3 mm
Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT
2 layers22.9 × 30.7 mm
Espbb
techinc/espbb12e1ESP8266 ESP-12{E,F,} breakout board
- Size
- 22.9 × 30.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 25
- Pads
- 66
- Tracks, vias
- 122, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 Dec 2015
- Updated
- 4 Dec 2015
Overview
Espbb is an open-source printed circuit board by techinc, from the techinc/espbb12e repository on GitHub. It is a 2-layer board of 22.9 × 30.7 mm with 12 parts on 25 nets, routed with 122 tracks and 5 vias.
It is built around the ESP-12E and AMS1117-3.3. Its parts include 3 resistors, 3 ICs, 2 capacitors, 2 connectors and 1 switch. It belongs with the ESP8266 boards of this library.
Main components
2
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C | SM0603_Capa | C1, C2 |
| 2 | CONN_01X12 | Pin_Headers:Pin_Header_Straight_1x12 | P1, P2 |
| 2 | R | SM0603 | R1, R2 |
| 1 | openhw | ||
| 1 | 0Ohm | r0603:SM0603 | R3 |
| 1 | AMS1117-3.3 | sot223:SOT223 | U3 |
| 1 | ESP-12E | esp8266:ESP-12E | U1 |
| 1 | LM6206 | SOT23 | U2 |
| 1 | SWITCH_INV | SIL-3 | SW1 |
Questions
How big is the Espbb PCB?
It measures 22.9 × 30.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Espbb use?
12 parts, built around the ESP-12E and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Espbb KiCad files?
From the techinc/espbb12e repository on GitHub, at the commit this page was made from: the board is espbb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Espbb design in my own project?
Its repository states no licence, so its author keeps all rights: ask techinc before reusing the design.
Similar boards
- 2 layers68.5 × 53.3 mm
Iot wifi uno hw
iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno
56 parts26 - 2 layers26.4 × 17.3 mm
Knock homekit v1
andrewngai/HomekitKnock
This repo is the resources for the project on https://youtu.be/X5OxuFtGn0
12 parts17 - 2 layers
Smol boy V1
BogdanTheGeek/ESP_RC
An Open-Source Transmitter/Receiver for RC Planes, Cars, Boats and more based on ESP-NOW
21 parts16BSD-2-Clause - 2 layers51 × 43 mm
Egg timer
MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board
A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.
25 parts13GPL-3.0 - 4 layers29.9 × 32 mm
Models heart rev1.1
KushlaVR/models-heart
Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…
106 parts7GPL-3.0 - 2 layers16.3 × 110.2 mm
ESP12E Smart Coaster
atom-robotics-lab/ThermoGlow-Coaster
This project is an ESP12E based Temperature Controlled Smart Coaster. The project uses the following: ESP12E Module 12 x WS2812B SMD LEDs MLX90614 Temperature Sensor I2C Module Power Bank Charge-Boost Module for…
50 parts5 - 2 layers56.3 × 32 mm
ESP12-E breakout board
cyberstormdotmu/ESP12E-breakout
A simple and open source ESP12E/ ESP8266 breakout board. You will need an external programmer to program the module but most of the components required to run the module are present. Made with KiCad.
18 parts3