
BulkyModem Module
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
BulkyModem-32 Mini is an open-source printed circuit board by tebl, from the tebl/BulkyModem repository on GitHub. It is a 2-layer board of 38.7 × 73 mm with 26 parts on 52 nets, routed with 346 tracks and 10 vias.
It is built around the MAX232N, ESP32-WROOM-32 and 74HCT32D. Its parts include 7 resistors, 7 diodes, 6 capacitors, 2 ICs and 2 connectors. It belongs with the ESP32 boards of this library.
This is a faceplate, an inherently optional part of any build as it does not actually contain any active components. This faceplate mounts on the front of the device, and compared to the other options available, it is the shorter version 1. It is compatible with the following main projects:
It currently looks like this:

This means that it does not extend below the main PCB when installed, any faceplates installed on the bottom of device will not be covered up. Faceplate FP2 is the longer version of it. ↩
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 2k2 | resistor:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R6 |
| 4 | 1uF | BulkyModem:CP_Radial_D4.0mm_P2.00mm_Custom | C2, C3, C4, C5 |
| 2 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C8 |
| 2 | 10k | resistor:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R18 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D14, D15 |
| 1 | 74HCT32 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U6 |
| 1 | CTS | LED_THT:LED_D3.0mm | D4 |
| 1 | DCD | LED_THT:LED_D3.0mm | D5 |
| 1 | DCE | RND_DSUB:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J2 |
| 1 | ESP32-WROOM-32 | esp32_dev_board:ESP32-WROOM-32D_30_Alternate | A1 |
| 1 | LOGO | artwork:BulkyModem_small | G*** |
| 1 | MAX232 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U3 |
| 1 | RTS | LED_THT:LED_D3.0mm | D3 |
| 1 | RX | LED_THT:LED_D3.0mm | D2 |
| 1 | SD_CARD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | TX | LED_THT:LED_D3.0mm | D1 |

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!

tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!


apws/261103-reto-comp-andrew-grok-kicad
Rebuilt Z80 educational schematic in KiCad. The board is not routed yet.

roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer


ksr/p8x
Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project


It measures 38.7 × 73 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the MAX232N, ESP32-WROOM-32 and 74HCT32D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tebl/BulkyModem repository on GitHub, at the commit this page was made from: the board is BulkyModem-32 Mini/BulkyModem-32 Mini.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tebl before reusing the design.