2 layers100 × 100 mm
BulkyModem Module
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
81 parts11
2 layers100 × 23.2 mm
BulkyModem Module Panel B
tebl/BulkyModem11My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
- Size
- 100 × 23.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 29
- Pads
- 65
- Tracks, vias
- 107, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Jul 2022
- Updated
- 15 Oct 2024
Overview
BulkyModem Module Panel B is an open-source printed circuit board by tebl, from the tebl/BulkyModem repository on GitHub. It is a 2-layer board of 100 × 23.2 mm with 20 parts on 29 nets, routed with 107 tracks and 2 vias.
Its parts include 11 diodes, 2 resistors, 2 switches and 1 connector.
README
faceplates/BulkyModem FP1/README.mdBulkyModem FP1
This is a faceplate, an inherently optional part of any build as it does not actually contain any active components. This faceplate mounts on the front of the device, and compared to the other options available, it is the shorter version 1. It is compatible with the following main projects:
It currently looks like this:
Footnotes
-
This means that it does not extend below the main PCB when installed, any faceplates installed on the bottom of device will not be covered up. Faceplate FP2 is the longer version of it. ↩
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Mounting_Pin | mounting:M3_pin | M1, M2, M3, M4 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4 |
| 1 | 3k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | C64 | LED_THT:LED_D5.0mm | D10 |
| 1 | CTS | LED_THT:LED_D5.0mm | D13 |
| 1 | DCD | LED_THT:LED_D5.0mm | D1 |
| 1 | Front Panel | Connector_PinHeader_2.54mm:PinHeader_1x21_P2.54mm_Horizontal | J1 |
| 1 | LED_RGBC | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D17 |
| 1 | MODE | 6pin_switch:dpdt_switch_black | SW1 |
| 1 | POW | 6pin_switch:dpdt_switch_black | SW2 |
| 1 | RI | LED_THT:LED_D5.0mm | D2 |
| 1 | RS-232 | LED_THT:LED_D5.0mm | D11 |
| 1 | RTS | LED_THT:LED_D5.0mm | D12 |
| 1 | RX | LED_THT:LED_D5.0mm | D15 |
| 1 | TX | LED_THT:LED_D5.0mm | D14 |
More from tebl/BulkyModem
12- 2 layers100 × 100 mm
BulkyModem Terminal
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
81 parts11 - 2 layers100 × 100 mm
BulkyModem-32 Module
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
69 parts11 - 2 layers70.7 × 60.9 mm
BulkyModem RS-232 Adapter
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
33 parts11 - 2 layers70.7 × 43.8 mm
BulkyModem UserPort Adapter
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
27 parts11 - 2 layers38.7 × 73 mm
BulkyModem-32 Mini
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
26 parts11 - 2 layers100 × 23.2 mm
BulkyModem Module Panel
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
16 parts11 - 2 layers100 × 23.2 mm
BulkyModem Terminal Panel
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
16 parts11 - 2 layers100 × 100 mm
BulkyModem FB1
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
10 parts11 - 2 layers100 × 100 mm
BulkyModem Terminal FA1
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
10 parts11 - 2 layers48.8 × 48.3 mm
BulkyModem Module Audio
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
7 parts11 - 2 layers100 × 100 mm
BulkyModem FA1
tebl/BulkyModem
My significantly more expensive, slightly less capable version of the Zimodem-hardware. Surfing the BBS-world at a blazing 1200 baud (or faster)!
6 parts11
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the BulkyModem Module Panel B PCB?
It measures 100 × 23.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BulkyModem Module Panel B use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BulkyModem Module Panel B KiCad files?
From the tebl/BulkyModem repository on GitHub, at the commit this page was made from: the board is BulkyModem Module Panel B/BulkyModem Module Panel B.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BulkyModem Module Panel B design in my own project?
Its repository states no licence, so its author keeps all rights: ask tebl before reusing the design.