4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0
2 layers30 × 14 mm
Esp32s2-uart
TDA-2030/esp32s2-usb-uart3USB to UART by ESP32-S2
- Size
- 30 × 14 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 37
- Pads
- 217
- Tracks, vias
- 397, 95
- Pours
- 174
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Mar 2021
- Updated
- 18 Mar 2022
Overview
Esp32s2-uart is an open-source printed circuit board by TDA-2030, from the TDA-2030/esp32s2-usb-uart repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 30 × 14 mm with 51 parts on 37 nets, routed with 397 tracks and 95 vias.
It is built around the ESP32-S2FH4, AMS1117-3.3 and USBLC6-2SC6, with the PESD5V0L5UY among its other parts. Its parts include 16 capacitors, 11 resistors, 7 diodes, 3 ICs and 3 connectors. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
Main components
4
ESP32-S2FH4
QFN-56-EP(7x7)-40℃~+105℃ -97dBm 150Mbps 19.5dBm 2.412GHz~2.484GHz 2.4GHz 2.8V~3.6V 310mA 63mA SPI、UART、ADC、I2C、JTAG、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
PESD5V0L5UY
SOT-363SOT-363 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
README
README.mdESP32S2-USB-UART
USB to UART board by ESP32-S2
Feature
- USB to UART
- PCB size: 30mm x 14mm
- All output with ESD protection
- 3 LEDs
- LEDs to indicate UART signal
- 3.3V output
- Either USBA or Type-C plug
- Auto download for ESP series chips
- Wireless connecting
Pin definition
| 1(TCK) | 10(TX) |
|---|---|
| 2(TDI) | 9(RX) |
| 3(TDO) | 8(EN) |
| 4(TMS) | 7(IO0) |
| 5(3V3) | 6(GND) |
Preview image
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C9, C11, C12, C13, C14 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R8, R9 |
| 3 | 10uf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 10pf | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | LED_YELLOW | LED_SMD:LED_0603_1608Metric | D10, D11 |
| 2 | PESD5V0L5UY | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D4, D5 |
| 2 | TBD | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Antenna_Chip | RF_Antenna:Johanson_2450AT43F0100 | AE1 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | Conn_02x05_Counter_Clockwise | my_footprint:Header_2x5_pin | J3 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm | Y1 |
| 1 | ESP32-S2FH4 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U3 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | L | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SW_Push | my_footprint:button | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_A | Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal | J1 |
| 1 | USB_C_Receptacle_USB2.0 | my_footprint:USB_C_Receptacle | J2 |
| 1 | logo | my_footprint:ESP-USB-Bridge | logo1 |
Similar boards
- 2 layers108.8 × 157 mm
1. Mainboard
DangKhoa2210/Digital-Microfluidics
This repository contains the design files, firmware, and documentation for a Digital Microfluidic (DMF) platform, developed for research in droplet manipulation and potential applications such as on-chip PCR…
237 partsAGPL-3.0 - 4 layers50 × 50 mm
Iot diagnostic tool
mbabela/secured-vehicle-monitoring
Repository for my bachelor thesis at FEEC BUT
109 parts - 2 layers124 × 115.4 mm
- 2 layers181.6 × 172.3 mm
- 2 layers232.6 × 140 mm
- 6 layers26.3 × 27.6 mm
ESP S2 SoM HW00
PumaFPV/PSoM
PSoM, either Pico System On Module, or Puma System On Module for those who prefer
58 parts1MIT - 4 layers161 × 87 mm
MainPCB
rohit-env/minideck-pcb
so I went off and designed a whole cyberdeck pcb, it’s kinda sick, it's a full-on deck with ports, buttons, blinky stuff, and that clean hacker aesthetic.
194 parts
Questions
How big is the Esp32s2-uart PCB?
It measures 30 × 14 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32s2-uart use?
51 parts, built around the ESP32-S2FH4, AMS1117-3.3, USBLC6-2SC6 and PESD5V0L5UY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32s2-uart KiCad files?
From the TDA-2030/esp32s2-usb-uart repository on GitHub, at the commit this page was made from: the board is esp32s2-uart.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32s2-uart design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).