
Basic digital
taseraul/schrodinger-studio
Portable mixer with microphone preamp, bluetooth input, battery management, lighting system and modular design.

Portable mixer with microphone preamp, bluetooth input, battery management, lighting system and modular design.
Mood is an open-source printed circuit board by taseraul, from the taseraul/schrodinger-studio repository on GitHub. It is a 2-layer board of 75 × 40 mm with 91 parts on 71 nets, routed with 438 tracks and 125 vias.
It is built around the ESP32-C3-WROOM-02-H4, SC810ULTRT and TJ-S5050UG2W5TLCBRG-A5, with the AO3401A among its other parts. Its parts include 53 resistors, 14 diodes, 9 capacitors, 3 ICs and 3 transistors. It belongs with the audio and music boards and the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 5R1 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18, R19, R20, R21, R29, R30, R31, R32, R33, R34, R35, R36, R41, R42, R43, R44 +8 |
| 12 | 51R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24, R25, R26, R27, R37, R38, R39, R40, R49, R50, R51, R52 |
| 12 | C440459 | LED_SMD:LED_RGB_5050-6 | D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R8, R9, R14, R15, R16, R57 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C6 |
| 3 | 2.2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R17, R22 |
| 3 | C347476 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R28 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C11 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C5, C7 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2 |
| 2 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2 |
| 1 | 1.5u | Inductor_SMD:L_Wuerth_MAPI-4020 | L1 |
| 1 | 120k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 56p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | BAT+ | TestPoint:TestPoint_Pad_4.0x4.0mm | TP1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | ESP32-C3-WROOM-02-H4 | SamacSys_Parts:ESP32C3WROOM02H4 | IC1 |
| 1 | GND | TestPoint:TestPoint_Pad_4.0x4.0mm | TP2 |
| 1 | SC810ULTRT | SamacSys_Parts:SON50P200X200X60-7N-D | IC6 |
| 1 | TPS564247DRLR | SamacSys_Parts:SOT50P160X60-6N | IC2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A_CircularHoles | J2 |

taseraul/schrodinger-studio
Portable mixer with microphone preamp, bluetooth input, battery management, lighting system and modular design.

taseraul/schrodinger-studio
Portable mixer with microphone preamp, bluetooth input, battery management, lighting system and modular design.

taseraul/schrodinger-studio
Portable mixer with microphone preamp, bluetooth input, battery management, lighting system and modular design.

deadbandlabs/syncro-mainboard
Hardware Design for Syncro FFB Interceptor


Spritetm/picframe_colepd
A WiFi picture frame allowing for remote photo uploads, using an ESP32-C3 and a 5.6" color E-ink display



nepyope/Project-Homunculus
Project Homunculus is open-source, low-cost hardware for capturing human hand and arm motions. It has two parts.
It measures 75 × 40 mm and has 2 copper layers, 1.6 mm thick.
91 parts, built around the ESP32-C3-WROOM-02-H4, SC810ULTRT, TJ-S5050UG2W5TLCBRG-A5 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the taseraul/schrodinger-studio repository on GitHub, at the commit this page was made from: the board is Hardware/mood/mood.kicad_pcb and its schematic Hardware/analog_board/amp1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask taseraul before reusing the design.