2 layers100 × 100 mm
2 layers45.3 × 57 mm
Clock
tantecky/embedded1My stuff for embedded devices
- Size
- 45.3 × 57 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 18
- Pads
- 60
- Tracks, vias
- 91, 27
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Nov 2015
- Updated
- 12 Nov 2024
Overview
Clock is an open-source printed circuit board by tantecky, from the tantecky/embedded repository on GitHub. It is a 2-layer board of 45.3 × 57 mm with 18 parts on 18 nets, routed with 91 tracks and 27 vias.
It is built around the WEMOS D1 MINI and BME280. Its parts include 5 ICs and 1 connector. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
2Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 10uF, 10uF |
| 1 | BME280 | !myfoots:4pinI2C | U3 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | 5V |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | ANT |
| 1 | GPIO | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LED | !myfoots:4pinTM1637 | U5 |
| 1 | LOGO | !myfoots:microusb | G*** |
| 1 | LOGO | !myfoots:wifi | G*** |
| 1 | OLED | !myfoots:4pinI2C | U4 |
| 1 | RXB6 | !myfoots:rxb | RXB6 |
| 1 | SPARE | !myfoots:4pinI2C | U6 |
| 1 | SPARE2 | !myfoots:4pinI2C | U7 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | WeMos D1 mini |
Questions
How big is the Clock PCB?
It measures 45.3 × 57 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clock use?
18 parts, built around the WEMOS D1 MINI and BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clock KiCad files?
From the tantecky/embedded repository on GitHub, at the commit this page was made from: the board is esp8266/clock/!pcb/clock.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clock design in my own project?
Its repository states no licence, so its author keeps all rights: ask tantecky before reusing the design.
More from tantecky/embedded
6- 2 layers100 × 100 mm
- 2 layers44 × 77 mm
- 2 layers31.7 × 50 mm
- 2 layers33.3 × 44.7 mm
- 2 layers25.6 × 36 mm
Similar boards
- 2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers146.7 × 95.3 mm
- 2 layers37.6 × 29.3 mm
Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm
Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm
Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm
